Small Belt Clip by Blade Tech

Very small. Alot smaller than anticipated. But it works perfect for my Cold Steel Urban Pal. The holes don't match up and I had to mount it using 4 small zip ties. But if you can get past the ghetto way of attaching it its a nifty little gadget that allows me to carry my Urban Pal on my belt. Something I wasn't able to do previously.

Only has 3 rubber washers, kinda seems like it'd have more considering the quantity of bolts. But I'm sure I'll get by without a fourth. Wasn't even big enough for the knife sheath a bought it for, but that's not a complaint. I'll just keep it and use it for something else, and get a larger clip for that knife. Tek Loks are worth it.

Not happy. The spacing of the openings is different than the larger version and I couldn't attach anything to it because it didn't line up with my larded sheath.

Worked perfectly on the kydek sheath I ordered off E bay to fit a Cold Steel "Roach Belly" knife to use in a cross draw configuration. The quality seems excellent. The opening is just short of 1 1/2 inches and my 511 riggers belt just squeezes into it. This works perfectly for me but, check the size of the belt to be used on before ordering. The purchase saved me a few dollars in buying my own rather than ordering already attached.

replacement for the Spyderco G-clip on a factory Spyderco-Moran sheath. The hole spacing was perfect, and the convenience of the Tek Lok I find much preferable to the G clip. The included hardware was too short at least for this specific application, so I had to get into the parts stash. It would be nice to have a little more hardware come with the item, but once I got it set up, it's great.

I previously ordered the Large Tek-Loc. The screws were too short to use the rubber grommets. Just like the Large Tek-Loc, the screws in this Small Tek-Loc are way too short to use the rubber grommets. Did they even test one of these with the rubber bushings on 2 standard Kydex thicknesses of 3/16" or 5mm? I found a couple screws and made it work for now, but they are not black, and they don't have thin heads like the supplied screws. For the length, 3/8" screws would be just right. These devices would be perfect and people would pay the extra DIME to get a couple longer, black, thin headed, 3/8" screws. I tried to contact the manufacturer to see if they have longer black screws with no luck. So, if you want to use the grommets, you will have to find yourself some longer screws.

Works great and has solid construction. I am using the large tek look for my BK2 and am hoping to get a Becker necker to use the small teklok on.

I didn't like this item. I like the large Tek-Lok but the small one is too small for my needs at this time.