Can i have the correct wiring diagram becuse the manual is showing that the Neutral is going to the line side on the public power???

White wire to white wire black to black green to green . Watch this video https://www.youtube.com/watch?v=ni0A_ZdH7aU

Can this switch be wired with two 120v (split phase power) inputs in lieu of 120v and neutral? The neutral would be hot1 the other input hot2?

Yes the switch can be wire with two phases. Two hot 1(L1) will be 1phase, hot 2 (L2) will be another phase then tie the neutral (N) in with the utility neutral and the ground (G) with the utility ground. When using two phases the neutral is NOT to be wired in the switch but with the utility neutral.

is this transfer unit fused? If not what size fuse do I need?

Because this ATS is rated at 50A CONTINUOUS (assumed) power, circuit breakers on its input & output need to be 125% of this value or 60A. There needs to be a SEPARATE single-pole breaker in the main breaker panel (or sub panel) that feeds 120V grid power to the ATS. If the inverter used is not already equipped with an output breaker, an external 60A breaker must be provided on the inverter's AC output (power is always overcurrent protected at its source).

Is this compatible for grid power 220v 60hz? because the grid power in our area is 220-240v 60hz.

It says 220-240 50hz but it will work with 60hz as it doesn’t monitor the frequency. It’s just a big switch which switches between supplies when the batteries supplying your inverter reach a preset level.

Display type	LCD
UPC	741722875483 703931915893 703931915732
Manufacturer	WENZHOU NOVA NEW ENERGY CO., LTD
Product Dimensions	18.8 x 17.02 x 7.11 cm; 1.32 kg
Batteries required	No

MOES Dual Power Controller 50A 11.5KW Automatic Transfer Switch for ATS DC 12V 24V 48V AC 110V 220V Off Grid Solar Wind System

التفاصيل

الوصف

المواصفات

الأسئلة الشائعة