Lutron Diva LED+ Dimmer Switch, Paddle Dimmer, Single Pole/3-way

Just what we wanted! Installation instructions were easy to follow, and I had it installed in about 10-15 minutes including the time finding the correct breaker switch to turn off the juice. I used it to control 9 very bright kitchen LEDs rated at 12.5W each. So, combined they were well under the max 150W the switch is rated for. No flickering or humming - it works great and my wife is pleased with her new kitchen lighting option. It's cheaper than replacing with lower wattage lights and we still have the brightness option available when needed.

Love this dimmer switch! This is the second one I've purchased, and it works great. I really like that the dimmer is built right next to the switch without increasing the overall size of a standard wall switch. It looks clean, is easy to use, and provides smooth dimming control. Highly recommend.

My house has Leviton light switches. I tried a Leviton dimmer for my bedroom LEDs. Had horrible flickering when dimmed. This Lutron Diva replacement works perfectly. Easy to install and importantly, no flickering Highly recommended

The switch performed very nicely. I was somewhat skeptical b/c the factory box Lutron packed it in was mangled pretty badly. But upon inspection of the switch itself; I could tell it had not been used. No flickering with the dimmable bulbs. I am pleased.

Easy to install. Neutral wire not required. Smooth slider and no flickering at lowest setting unlike other brands. I'm running four can lights simultaneously with this switch and no issues.

We just had our first child and during the course of setting up the baby's room we realized we needed a way to reduce the light level in the room at night when changing diapers, etc... I bought this unit to match another I had in the house aesthetically. I like it because you operate it normally with the rocker switch, but then if you want to turn down the lighting level you can using the discreet slider. This seems to not put as much wear and tear on the dimmer slider as it infrequently is moved. It took quite a bit of research to figure out what all the different models of Lutron dimmers did. They have a lot of them that look identical, but with different characteristics operating wise. Even looking at Lutron's site, not all the model numbers matched up with what Amazon sold. I eventually figured out that this would be the best dimmer for me as compared to my older one downstairs, this is a newer model that supports CFL/LED screw in type bulbs. It has one wattage rating for CFL/LED and a separate for incandescent (i.e. 150 watts for CFL/LED and 600 watts for normal incandescent/halogen). While I was using this on a halogen fixture today, I wanted the ability to swap to LED later so I went with this one over the older series. Note that this one does *not* have the convenient little night light that let's you find the switch in the dark like the older series (that only does incandescent) does. I suspect this is because in order for that to work, it must "leak" some current through the "load" light bulb in order to light the nightlight, and CFL/LED ballasts don't think that is very funny. Amazon also sells this same exact switch, but with an "H" on the end of the product SKU. From what I can tell, that just means you get the "retail" clamshell packaging and a faceplate cover with it instead of the small contractor style cardboard box. I hate packaging waste and I already had faceplate covers, so I went with this one. One other feature of note is that this unit has a little thumbwheel on the bottom left of the switch (behind the wall plate cover) that let's you set the minimum dimming level. I suspect this is to keep CFL's / LED's from freaking out and flickering when they don't get enough power to fire up the lamp and keep it lit. I am not sure if the older series had this or not. Since I am just using it with a halogen light right now I left it set to the default setting which works great and starts off at an extremely low light level. My wife loves me for buying and installing this thing, and I am happy with the quality. Highly recommended! -Eric

correct switch, correct color, works as advertised, attractive

Exactly what we needed. Works great.

These work great with LED lights. They arrived quickly and in perfect condition with installation instructions that are clear and accurate.

Decorativas y funsionales

Que l'interrupteur et les Leds de Cosco sont compatibles

Pretty good. Nice solid feel to the switch and dimmer, dimmed my led dining room ceiling light way down, and no flicker. Replaced a Leviton SureSlide which did none of that. Gets expensive when you need to also buy a wall plate. Matched the almond switch with a Lutron light almond wall plate and I think it looks good.

Funciona de manera perfecta con unos leds dimmeables chinos que compre de ebay. No cabe duda de que son compatibles con una gran cantidad de leds.