Universal Sight Pusher Tool for Removing or Installing Rear Sights, ( All Block Sets Included) (Black)

الوصف

All other pictures are only for reference and tool use. I can make different colors upon request for Buy it Now auctions. Please check for your specific use before purchase. Please see dimensions in pictures to verify fit. Comes with spacers for use as a universal pusher. Guns in the pictures are a Glock 17 and a Springfield 9mm Sub Compact. NO FIREARMS INCLUDED IN THIS SALE. It also works good at the range for adjusting the sights side to side.To compensate for sloppy tolerances in the dovetail cuts most manufacturers machine their sights a little large and you will need to fit the sights by filing or stoning.1. Look at the sight and see if you need the angled side or the straight side of the pusher block. Make sure the gun is unloaded 2. Remove slide from pistol.3. Clean gun 4. Use oil or gun grease on the threads of the tool and oil the sight so it moves easily. 5. Install the slide and shim as needed with spacers or washers so you`re lined up to push at the bottom of the sight 6. Put slide into tool. Use the included spacers to adjust for proper fit for your specific handgun. You can use them anyway you wish to make it fit correctly. Place side spacer TOWARDS handle as in pictures. 7. Check that you have it lined up right. You might want to put a something to protect your gun in-between he gun and tool. 8. Slowly turn the bolt head and keep checking as the sight moves into alignment. ( 20 pounds of torque on a 6" long wrench is over 2,000 lbs of pressure pushing on the sight. 9. DO NOT force it " STOP " and soak the slide and sight in gun oil over night and then try again to get it apart This product is not associated with GLOCK in any way. All rights reserved. PLEASE contact me before initiating a return or leaving negative or neutral feedback OR leaving less than 3 stars for all categories.