RZXPneumatic Tool Air Riveter - 3/32", 1/8", 5/32", 3/16" and 1/4" Capacity with 50pcs Open End Blind Rivet (1)

Great pneumatic riveter for the price. I read a lot of reviews online about pneumatic riveters and found this one on Amazon. A reviewer found that it is the same unit as the Astro PR14. Even the part numbers are the same, but it is $20 cheaper and does not have Astro engraved on the handle. I received it today and it comes with all the same tools as the Astro. Five rivet size tips, an extra set of jaws and an 1/4 air adaptor are included. No instructions but it did include the parts diagram and list. I printed the Astro PR14 instructions off the Astro site and followed those for set up. Adjusted, oiled and changed tips for 3/16 rivets (comes set up for 1/4"). Turn my compressor up to 125 psi and started riveting. Worked prefect! If you are not commercially manufacturing and just want a good garage tool, I do recommend this tool. It sure has saved my old wrists from a lot of pain squeezing those old hand rivet tools.

I only use rivets occasionally so I had a hard time justifying an air powered tool for it. I have used the same hand powered tool for 20 years. For the price of this tool I had quality concerns so I tested it on the largest steel rivet it can handle and it performed great. I also completed a project with it requiring 10 rivets and did not have any issues. My hands and wrists are angry that I didn’t buy it sooner.

I’ve put about 100 1/4 stainless rivets through it so far. Sometimes you need a second trigger squeeze to get it to cut.

The rivet pins are not ejecting very well, but it does work. If you are doing something that requires high production, you might want to try a more expensive unit.

I received this order today but the plastic cup that goes on end to catch spent rivets is busted into.

Used for a while, borrowed a cheaper harbor freight and threw this one away.

Required predrill in some instances

Works Great !

I love this tool

Es buen producto pero para conseguir las refacciones es muy difícil. Pedí me ayudarán o me dieran un link donde pudiera yo comprarlas pero el vendedor nunca respondió. Me interesaba tener las refacciones porque queri hacer pedido de 10 más.

i have seen such kind of tools in Bombardier factory - that one is not a match to them, but if you pay attention where the tail of the rivet will fall (the rivet tails do not go in the cap unless you up the tool ) and if you are not very picky regarding the tension, then you will like this tool

Great tool. Got fed up of cranking by hand for all the rivets I needed to do. This works wonders.If you’re looking at the more expensive Astro (so did I), don’t bother. This is the EXACT same just without the name. Same colors and all.

Every 3 rivets it would break the piece as it pulled in so you have to take it apart and clean out. This product is a waste of time and money.