GPU Fan Connector Adapter, Black, 10.5" Length, 26AWG Wire, 4-pin GPU Mini to 4-pin Fan Connector (M)

Shipping was quite prompt and product was as described. Right, so one of the two fans on my old GTX 760 FTW went kaput. Instead of buying a new card (since bitcoin has jacked up the gpu market), I decided to replace them. This left me with one good, if unhoused, ATX fan and no way to make use of it since the connection is a mini four pin. Long story longer, I have an itx (Hadron Air) case which is constantly struggling with heat issues... so this adapter, a spare four pin to 3 pin adapter, a spare low noise adapter, a spare 3 pin molex adapter (Noctua spoils with the spare parts), my extra fan, heating/air duct strapping (bent as needed painted black attached with velcro for a fan mounting), installed to give me some extra airflow direction inside my case. Its helping to move air away from my cpu cooler and direct to my single exhaust fan (Only have 2 case fans, could exhaust both but seems to work better with one flipped for cool air intake onto the CPU cooler). All in all this fan addition has saved me about 5c, well worth it for my rig (GPU was 77-80c full load, now 72-75c/CPU (4790k) was 59-64ish, now 55-59ish though it bottlenecks at the gpu). It was a bit of a project I suppose but all in all fairly simple. Anyway, yea, this adapter worked exactly as intended to make an otherwise useless fan useful again.

Needed the mini 4 pin male end to fabricate a cable so that RGB LEDs on my EVGA 1080 ftw (LEDs are on the shroud) can sync with the rest of the system (Asus Aura analog RGB header). The cable is way too expensive for what it is. You probably can get this on fleabay for 50 cents.

I used this to run the fans on my XFX R9 390 from my mother board. Worked like a charm once I plugged it into the fan 1 header.

Very specialized cable. For powering your gpu fans or water pump with something else, like your motherboard, or fan controller or just a power supply adapter. Worked with my gpus and made full fan benching just a little more stable. I liked how they made it petite enough to fit where I needed it.If you wanted your gpu board to power some case fans or something you would need the opposite cable. This is to take the power draw for the fans off of the gpu board.Which it does quite well.

I accidentally burnt fan controller of my Zotac GTX 1050Ti mini and this product turned out to be my savior.Though I had to buy another PWM fan with 4pin as the Zotac version of GTX 1050Ti comes with 2pin fan (no fan control) . With new fan and this fan adapter, GTX 1050Ti works with no noise and great control on fan through motherboard BIOS. The seller is very quick in replying and shipping.

The power connector for my gpu fans on the gpu PC burnt up. Just hooked this up to an external fan controller, set it for about 38 decibels, and voila my 290x is still good.

works. appears good construction.

It took it's precious time getting here but turned out to be a life saver for running an Evga Hybrid kit pump outside of the computer via a 12v 4 pin pwm header to usb type a cable to usb wall adapter.