how can remove my old one?

On the HFS Guillotines, the cutter stick is held in place by two small bolts, not thumb screws, on the underside of the Guillotine. You can see these bolts in this video that HFS published on another problem, I thought they had a video published on how to replace the cutter stick, but it is not there on YouTube and HFS' site is currently down. https://www.youtube.com/watch?v=kxyhKKO1uEU&list=PLWwFwQGPnJOiTn0gomf9Z_33pRSHuE_MX At 30 Seconds in, while the cutter's underside is to the camera, the gent takes out the thumbscrews which hold the guard in place, you can see two hex head bolts sticking up from where the cutter stick is located. You actually can see the cutter stick in the two wholes facing the camera as well. For normal operation of my Guillotine, I usually leave these two bolts lose or completely removed as I end up having to change sides on the cutter stick quite frequently and it's just to much work flipping it up on it's side, removing the screws, putting it back down, CAREFULLY, rotating the stick, and then lifting it back up in order to secure the stick back. It is also worth noting that the replacement stick was 1-2mm longer than the original resulting in an extremely snug fit, which I prefer with the retention bolts removed.

Manufacturer	HFS
Brand	HFS
Item Weight	8.8 ounces
Package Dimensions	15.79 x 1.38 x 1.34 inches
Item model number	16150
Is Discontinued By Manufacturer	No
Material Type	Paper
Size	Replacement Cutting Stick
Manufacturer Part Number	16150

HFS 12" Stack Paper Cutter - Replacement Cutting Stick (Replacement Cutting Stick 12-inch)

الوصف

المواصفات

الأسئلة الشائعة