Original Precision Bass Pickup

Beautiful, classic Fender tone. Rich and full with lots of top end clarity. Turned my Mexican p-bass into the real deal. Huge difference from the factory pups!

I have an old Precision Bass, made in Mexico. The pickups were awful and I put up with it for a while until I decided to spend the money and upgrade the pickups. I am not a professional, I just play for myself as a hobby. Otherwise I would have just invested in a better bass. Still, it is not a bad instrument, but the stock pickups hum a lot. If you have never changed pickups it is not difficult. I took off the pick guard, snipped the wires to the old pickups, removed the old pickups, and dropped the new ones in. Solder the wires (black to black, white to white), wrap the solder connections in electrical tape or heat shrink tube (preferable to electrical tape), and put everything back together and it was a quick change. Be sure to adjust the pickups so they are close to the strings without touching them. At first they were too far away and the sound would cut out randomly. Loosening the pickup screws a bit brings them toward the strings and no more cutting out. Once I had it together and retuned the strings (I loosened them to be able to work on the electronics) all I can say is "wow." These sound amazing, and no hum (these are humbucking pickups). Very crisp sound, nice tone. Despite this particular P-bass being a cheaper version of the real deal it sounds amazing. Good pickups and good strings do wonders for the sound. I have not changed any of the other electronics. I have heard that the tone and volume potentiometers are also cheap on the non-American models of the P-bass, but this sounds amazingly better with just new pickups. I highly recommend upgrading to these pickups if you have a cheaper model of the Precision Bass with crappy pickups that hum.

Like the box says, get these if you want that original Fender Precision Bass sound. Made well, prewired to a new copper ground plate - solder in 2 wires and you're in business. At one time I had active pickups in this 30 year old Made In Japan P bass. Run by a 9 volt battery (I routed a battery cavity under the pickguard), they were bright and "attacky", and I really liked them at the time. Then, after some years of using those pickups, I reinstalled the originals out of a desire for change, and was amazed by the great tone. I didn't recall loving the original tone before, but this was great. That was at least 10 years ago. Then I bought these recently to replace the original pickups. Because the original pickups sound great to me in this bass, I did this primarily 'cause I've upgraded everything on this instrument over the years - better bridge, better tuners, and I now did the electronics, thinking I could improve the instrument's tone even more. While I can't say, "wow - it sounded awful before and now it's amazing!", I think maybe it's got better definition and clarity than before. It certainly has the traditional sound I'm looking for and I'm not wishing I hadn't bothered. I need to play and record with it more to form a clearer opinion, but so far it's everything I was hoping for, tone-wise. I did note that the new pickups look like they're maybe manufactured better than the old stock ones. All in all, these are the real deal, provide original spec sound, and they're made well and easy to install. It's hard to know whether you'll improve your sound in a way you'll like in any given instrument when you change pickups. But if you like upgrading your gear and experimenting, it's always worthwhile to try.

When I picked up my 2019 MIM Player Series P-Bass, I wasn't entirely convinced by what I was hearing. It was my first P-Bass, so maybe I wasn't used to the sound profile. Regardless, it wasn't "that P-Bass sound" I heard in my head. So I started to chase that tone. After hours (days) of watching videos, I found that the 1962 P-Bass reissue with flatwounds was exactly the sound profile I wanted. That led me here to the Fender Original Precision pickups. These pickups, with a 920D pot harness and new flatwounds, were EXACTLY what I was looking for, with no compromise. They're smooth, growly, articulate, sensitive, and punchy all at the same time. They shine in heavy rock, light jazz, slap/pop funk, and everything else. These helped me nail that vintage P-Bass tone I've been chasing for months. If you're looking for a top-notch set of pups that hits right on that 1962 sound, especially at a price that won't break the bank, then look no further.

You cannot go wrong on this

Im a pro-tech and installed these for a customer. it was a 2014 MIM fender P-bass. the stock pickups on these are basically the same that come on a squire VM....meaning crap. His shorted out or were extremely low Ohms (5k) and would barely be heard with flatwound strings. these New fender pickups came with cloth wire and a nice brass base-plate on each section. they tested at 13k and really brought out the mids (with flatwounds). the output was very strong without any harshness or distortion (i was playing through an old CRATE amp to). Its really a same Fender insists on producing mediocre instruments when a simple fix of better pickups could really improve a instrument with their nameplate. one caveat:these may be a bit bright if you play bright strings......you could tame the high's with a capacitor swap to a rating that doesn't pass all the brightness.

Depuis le temps que je voulais le son!! et bien là je l'ai, vraiment simple a poser rapide, deux petites soudures et le tour et joué, monté sur sur une basse Prodipe don la lutherie et très bonne le son et réellement magnifique comme je veux maintenant Je recommande vivement

Si estás buscando el legendario sonido de los bajos eléctricos Fender Precision Bass estas son tus pastillas, sonidazo Precision 200% y sin ruidos, increíble la mejora que ha tenido un Squier Classic Vibe 60s con estas pastillas (y eso que las que trae de serie son alnico 5 de buena calidad), tengo también un Precisión USA de 1983 y a oido no noto diferencias con el Squier con estas pastillas Fender. Muy satisfecho con ellas y recomendadas 100%.

Kept as originally made in 62, no earthing etc....no substantial difference in tone from the stock Chinese one. All magnets have equal strength, the E is louder in my bass

My 1991 Left Handed Custom Shop 57 Precision Bass had one of those 57 vintage pickups (hand wound) with the raised "A Poles" and was a nightmare to get any sound from the E string with a really loud A string.....apparently the raised A poles are due to the A string being low output in 1957. I just couldn't get it to sound right.... Bought these pickups to try in it and WOW..!!! Absolutely sorted....the string volumes are now all perfectly balanced, and the sound is so much better than the 57 pickup (in my opinion) I didn't realise that there is no such thing as a left handed Precision bass pickup, so I had to carefully remove the pickups from the brass ground plate, flip it over and attach the rubber sponge dampers to the other side (making a mirror image). Luckily there is plenty of wire attached, so this was fairly easy, and fitted perfectly with the gold anodised scratchplate. This pickup set sounds incredible, and only the most moronic trainspotter would notice that it's a 62 and not a 57 pickup fitted.....I love my Custom Shop 57 even more now, these pickups maintain the authenticity of the bass, and really really sound good. :-))

Absolut authentisch in Klang und Verarbeitung.