🚀 Elevate Your Performance with Precision Engineering!
The HornBlasters Brass 1/4" Air Valve is a high-performance component designed for applications requiring robust pressure management. With a working pressure range of 150-210 PSI, a heavy-duty all-metal construction, and a 2.5 mm orifice, this valve ensures optimal airflow and durability, making it an essential upgrade for any serious enthusiast.
J**N
Works very good
No instructions or marking to show the in and out, believe me it matters as I installed it wrong first and it will leak air not allowing you compressor to build pressure, tested and switched in and out and it works great, wiring doesn't matter either one can be positive.
C**T
Works great!
This thing works great. I used it with a 150 psi onboard air system I put in. I used the relay and horn that came with the linked kit. Which is also awesome in its own right. But better with this and a compressor. There IS a direction indicator on this part. It’s cast in the brass under the chrome bracket. Remove two philips screws to see it. I attached a valve after it so I can turn horn off so I don’t deafen vehicle inspectors etc. I’ll update this if the solenoid ever fails.GAMPRO 12V 150db Air Horn, 18... https://www.amazon.com/dp/B07QXQ9HW9?ref=ppx_pop_mob_ap_share
A**R
but I like it so far
The valve is well built, opens and closes fast, I haven't had it in operation very long, but I like it so far. The valve was mot marked inlet / outlet, it will not hold pressure if installed backwards, easy enough the turn it around, so don't panic and call it bad, <grin>
R**F
geat fix for poor quality original
works at 125 lb, which original horn quit at 40
[**]
Works
It works as expected
4**S
price
works great for dual air horns and as a tank dump valve will buy from again
J**O
THE PRICE OF THE TOYS
I FOUND THIS ITEM TO WORK OUT PERFECTLY. I MOUNTED A AIR HORN ON THE ROOF OF MY 2013 HONDA CRV. "THE DIFFERENCE BETWEEN THE MEN AND THE BOYS IS THE PRICE OF THE TOYS" JOHN R VENICE FLORIDA
S**A
Needs a better discription.
No where in the discription does it say the operating range is 150-200 PSI. I operate my horn at 125 PSI. Had I known I never would have purchased this valve.
ترست بايلوت
منذ شهرين
منذ أسبوع
