VideoSecu 2 Pack 2-6 inch Adjustable Security Camera Metal Brackets Pan Tilt Wall Ceiling Mounts for CCTV CCD Box Body Camera Home Surveillance System 1SH

After a lot of looking, I found these security camera mounts. They are solid metal and can be adjusted to several lengths and angles. The box states they're white, however this set was more off-white. The one inch swivle head has a solid metal ball and holds the Eufy Camera easily at different angles. These mounts can be used with any camera using a 1/4 inch -20 screw hole. Hands down, these are the best camera mounts and you won't be disappointed. They are worth the extra money and much better than the less expensive plastic mounts.

I read through each review as I typically do.. with a very open mind as some of us are more handy and technical then others. The quality was spot on as others conveyed. I bought these mounts to see if they were compatible for a RING stick up cam, YES they were! I ordered two originally, then one more immediately thereafter. Product review- Product is made in China, so buyer beware, not all things created of equal quality. The metal is sturdy, nicely powder coated, and stable. Camera is very sturdy while on the mount The tilt is NOT 360 degrees but adjusted to the angles I needed. I do recommend the product and again, works with Ring camera too.

These wound up being my best option for perfectly positioning my Arlo cameras for home security. Pros: - They come with a few extension pieces so you can get the pole length just the way you want. - The socket joint has good range of mobility so you can find the mounting angle you need. - The finish is matte and takes paint well, so you can color match the hardware to the mounting location if desired. - The final result is rock solid Cons: - The socket joint moves all around until it is tightened all the way, there is no graduated tension. - You will spend most of your time fiddling with the angle of the mount in order to get it perfect, since you can't make small adjustments easily. - they don't come with adequate mounting hardware, so you may need to take a trip to the store for wood or masonry screws - the screw holes are on the small side, so you're limited in the range of screws you can use

These came up as a "customers also bought" suggestion when I purchased my Arlo security system, and yes, they are absolutely the perfect mounts for the Arlo cameras. My husband was the one who installed them, and he had them up in about 20 minutes. Fast and easy, and they are working great. These are excellent quality mounts for the price, very easy to adjust, and look clean and professional once installed. I'll attach pics of my Arlo cameras on the mounts. So perfect, they look like they came with the system.

Perfect. The OEM ones are $25 a pop and it is not necessary to get them. These worked perfectly and you know what? At these prices it's disposable so in two or 3 years, its cheap enough to replace. So far so good - no rust, stays in place, easy to configure. The OEMs are a rips off.

I bought 8 of these to replace the junk that came with my Zmodo cameras. These are pretty solid and fit the bill perfectly. Having the ones that came with the cameras to compare with these really helped me determine how nice these were. The swivel that adjusts where the camera mounts is solid and thick. The guy who installed my cameras bent the crap out of the brand new Zmodo brackets during the install. That was just so they would stay steady. The next day I ordered these and replaced all 8 of the junk original ones. I'm not sure why a company like Zmodo won't included brackets like these? It would sure make you feel better about what you are buying. We all say the same thing don't we? Cheap Chinese Crap. Well these are cheap price wise but they are not crap. I'm not saying these are the best brackets money can buy but I am saying they ARE worth the money you spend to buy them. I rather pay an extra $25 to Zmodo and have them send these with the cameras they sell then the paper thin crap they include now.....Plus I would not have to follow the installer around replacing brand new junk brackets the next day. That's just my 2 cents. I hope you enjoy them as much as I did. Robb

1. Pairs well with Netgear Arlo cameras. Had no problem mounting and adjusting them for perfect angle (Installed 10 ft high outdoors with ladder) 2. The color is off-white and closer to gray than white; Netgear Arlo cameras are glossy white so it won't be a close match 3. The adjustment wheel and wingnut to tighten are actually plastic so not 100% metal construction 4. Mounting screws are low grade. I stripped >2. Recommend drilling pilot hole first, then use a hand screwdriver to tighten 5. While the kit is highly adjustable, some of the shafts are hard to separate and when you do, you can scratch the paint coating easily if using tool Recommendation to VideoSecu - Adding a 90 degree shaft would make this kit even more awesome

Then I ordered these, seeing how they are made of steel instead of aluminum, and I'm very happy I did. I completely tore up one of the run-of-the-mill mounts that seem to be all over Amazon. Those are made of Aluminum and I ended up cross threading the tightening cap when I was installing an Arlo camera, and the only way to back off the tightening cap was to use some vice grips to unscrew it, shredding the threads in the process and ruining the mount. These mounts are simple, straight forward, and they just plain worked for me. I used some thread lock on the extension shafts to prevent them from unscrewing due to vibration or being bumped when I change out the batteries on the wire free cameras (have since returned by my Arlo cameras and purchased Amcrest wire free cameras). I would recommend these do anyone, especially those who have had trouble with the other style mounts. These are robust and exactly what I was looking for. Keep it simple and stupid.