Does it clean the oil cooler and prevent them from failing?

It "cleans" anywhere your engine coolant fluid would flow. It works best when it also is heated and under pressure like it would be when the vehicle is running at normal operating temperature. Leave the Thermostat in and turn on all heat to get circulation through the heater core. Wait for the vehicle to get to normal temp then start the clock and after the 12 min. turn off, let cool, and drain. Fill with clean water, run, turn off, let cool, drain. Repeat until clean water comes out.

do you have to flush out or can you leave in?

It's a flush, so you must flush it out with water. If left in too long it will degrade non-metal components like hoses, and gaskets, so it is important to NOT leave it in.

Will this remove stop leak and safe for the heater core and transmission coolers? i have a bmw x3

Regarding if it will remove "stop leak"; that is a big "maybe" because it depends on many things. It is "safe" for the heater core and transmission coolers as long as you follow the directions on the bottle. It is a very powerful cleaner so you do not want to overexpose any soft materials like hoses and gaskets. Especially if they are older hoses and gaskets. It does clean cooling systems and fuel systems "dishwasher clean" as a friend of mine likes to say. Rinse well after using. heat and pressure make it work even better, so leave the thermostat in. And start the clock after the car gets to operating temp. Then wait for the car to cool enough to safely remove the product and then rinse with water repeatedly until it comes out clean.

will this help with cleaning the oil cooler on a 2005 ford power stroke coolant side is plugged

Just to point out that the bottle and advertising all state that it is designed to remove rust and corrosion. Nowhere does it say it will flush "stop leak" from the system. While there are many people who have been successful cleaning some brands of stop leak using Thoro-Flush, that doesn't mean it will work on every variety of stop leak product available for use. Expecting a chemical reaction to a stop leak product from a product designed to react to metal oxidation (rust and corrosion) is an unreasonable expectation I feel.

Brand	IRONTITE
Product Dimensions	22.86 x 7.62 x 10.16 cm; 453.59 g
Item model number	468-9110-16
Manufacturer Part Number	468-9110-16
Assembly Required	No
Country of Origin	USA
Item Weight	454 g

Irontite Irontite ThoroFlush 468-9110-16

الوصف

المواصفات

لديك سؤال؟ انظر ماذا طلب الآخرون

الأسئلة الشائعة