🔌 Power Your Passion with Precision!
The JESVERTY Universal Compact Bench Power Supply is a high-performance AC-to-DC converter designed for amateur radio enthusiasts. With a fixed output of 13.8V and a robust 30A current, this compact power supply ensures reliable performance while prioritizing safety with built-in protections. Its lightweight design and ergonomic features make it an essential addition to any home lab.
| Material | Aluminum, Plastic |
| Color | Black |
| Item Dimensions | 5.9 x 2.36 x 7.52 inches |
| Item Weight | 1.42 Kilograms |
| Maximum Power | 414 Watts |
| Output Current | 30 Amps |
| Output Voltage | 13.8 Volts |
| Output Wattage | 414 Watts |
| Amperage | 3E+1 Amps |
| Form Factor | Compact Benchtop |
E**D
Powers the radio just fine
Compact and efficient, I use this to power my 2m/70cm Ham Radio and it does that job very well. It was easy to make the connection with the wires on the front of the device, and it is also convenient to have the on/off switch there. The lighted on/off switch is nice, but it also gives you another light showing that it is powered on. A good device for items needing 12v power.
D**E
Great value for hams
Great value. Used for ICOM IC 7300 and a 2-band 25W mobile ham radio. Surprisingly little to no impact to S/N (i.e. no noticeable RF noise). Fan is whisper quiet. Voltage is rather stable from 10-100W (voltage drops only about 0.1-0.2V at 100W). Just made a 4000+ mile phone contact in Europe on 20 meter band with 59 signal report with a 40m EFHW. Only tiny issue is that there is no wire hole and unable to remove the wire terminal nut. Recommended.
J**T
Been great so far, 9 months problem free
I've had this power supply for 9 months now for my Yaesu 2m mobile ham radio on a bench. It's been very good so far to date. I just bought a Yaesu FT-891 and going to put it on this power supply as well. I'm not going to have both connected at the same time, just one or the other.Full disclosure: I get into my local ham radio repeaters on 2m at lowest power setting, so I have not cranked up to a full 50 or 100 watts. So, I've never really put this power supply under heaviest loads. Since I'd rather be a good neighbor than try to fry my power supply, I will likely never take it that deep into it's power rating
D**H
13.7 Volts across all equipment.
Excellent Power Supply. Running a Xiegu X6100 Transceiver, Micro PA 50 Plus Amp and an IC-28H 2-meter Transceiver.
C**Y
12v dc power supply
Works exactly as described. Nice compact package to power 12v dc items.
D**I
Output terminal spacing is ~ 1" / 25 mm.
So far the power supply appears to be working fine. I'm using it to power a 100W amateur transceiver, an output meter and an automatic tuner. It produces 13.8V (no load). It is reasonably priced. I discovered that the spacing of the red / black output terminals was at about 1" / 25mm +. I have more frequently seen 0.75" spacing where I could use dual banana plugs for power connections, but this wasn't documented in the description.
B**A
Perfect
Great
R**K
All good
Just as expected!
ترست بايلوت
منذ 4 أيام
منذ 3 أسابيع
