ArmorSuit MilitaryShield Screen Protector for Samsung Galaxy Note 10+ Plus (Pack of 2)

Usually I get tempered glass screen protectors however I went with a review where this was one of the top listed Installation was easy, didn't have to worry about not having a perfect alignment as long as you follow the instructions (which it provides via a qr code / youtube video). It does recommend you wait to do it overnight so it has time to sit and seal. After following instructions (leaving the phone off as well and sat for roughly 24 hours if not a little shorter in time) it properly sealed to the phone. No bubbles at all. This is still one of the easiest phone screens I've installed without having to take it off and realign and risk getting things stuck under. So far no smudges have stuck to the phone screen. And it reads fingerprints with no issue. Didn't have to readd fingerprints (even though it suggests to do so) Definitely would suggest this screen protector

I had confused this screen protector with another company's tempered glass screen protector. Instantly, I noticed that this box was not the right shape or size to be able to hold a glass screen protector large enough for my Samsung Galaxy S20 ultra. My husband, an Air Force Vet, pointed out that the screen protector offered "Military grade protection" and was backed by a lifetime guarantee, and suggested that since I keep my phone in my back pocket, (I don't carry a purse-unless absolutely necessary.) military grade protection is what I should stick with. Inside the box there were 2 packages and 1 spray bottle with a clear liquid inside. Both packages were sealed. The large packaging containted the screen protector that was protected by a thicker plastic sleeve, and two pieces of high quality paper. The first sheet contained simple, clear, and easy to read instructions with a link to an installation video, and a contact email and phone number to reach out for assistance, if needed. The other paper explained the warranty and gave a satisfaction with your purchase paragraph, printed with the same simple, clear, and easy to read set up. The second packaging held a microfiber cleaning cloth, about the same size as one you would use to clean your eyeglass lense with and a rubber squeegee. I only had to watch the short video once to understand how to install the protector. The video was clear and bright, and the voice over was easy to understand. I am not very good with lining up screen protectors to match the cut outs correctly, however, this did not affect my ability to install it perfectly. The liquid inside the included spray bottle made it super easy for me to readjust the film until I was 100% satisfied with the placement. The directions even explained how to ensure the film would adhere to the curved edges of my phone's screen. After installation, I left my case off of my phone for the specific time frame the directions gave so that the film could set around the edges too. There were absolutely 0 bubbles- literally zero. It has been a few weeks since I installed the screen protector and the phone has been transferred back and forth between two different cases. Still not a single bubble, no lifting edges, no yellowing of the film, and best of all, no cracks in screen! I have not had a single issue with my fingerprint reader or its ability to sense and read my fingerprint. There are no mistouches when using my phone either. (I do usability testing and have my touches visible for when I screen record, so I know with 100% certainty there are no screen issues. I am so thankful that I took my husband's advice and stuck with Armorsuit. This is the best screen protector I have ever used, both with quality and affordability. I wish I had found them sooner! I am definitely a customer for life!

So far it's amazing. It took a little time and effort to install. Because of the edge on the galaxy phones, you will have to keep pressing the edges down until the liquid dries and the adhesive bonds. But it turned out better than I could ever expected. It's honestly not a grippy as I read it would be. My finger slides smoothly across the surface. I haven't used it much since installing it so I can't vouch for longevity, but it is definitely scratch resistant due to the fact that it is a film instead of glass. Those glass protectors dont last at all. They crack so easily, unlike these. But I do expect if you were to Hit or scratch it it would tear the film. The edges have not began to come loose yet after 3 months, but it has been in an OtterBox. I had a cpl very minor scratches on the screen before installing and it seemed to seal them up. I can't see them now! Which is pretty cool. Fingerprint scanner works fine. No issues. All in all, for the price and warranty it's unbeatable! And it's something you can easily install yourself if you have the time. Also make sure the screen is clean before install or you will have bubbles!

Why you should buy: -Unbeatable screen protection option for the price -Easy to install -No residual bubbles -Great adhesion to screen -Great case compatibility -No problems with fingerprint recognition or SPen usage Why you wouldn't(?): -Not a glass protector (read below for more on this) -If you really count on the self healing abilities to be miraculous Detailed Review: Since cracking my galaxy s8, I had only purchased glass screen protectors for my s9 and now my note 10+. My last screen protector I had (a whitestone dome) got a crack on the edge of it due to my 'carelessness' of putting my phone in the same pocket as my keys. Granted, I was very happy that it wasn't the screen on my cellphone that costs as my last Alienware I purchased but not happy that it was the second time this has happened to me. As I didn't have a bunch of spare cash to shell out on another screen protector just before Christmas I sought out a much more affordable alternative. Enter the ArmorSuit. Admittedly the two things that drew me to this item were the price and the fact that it WASN'T a glass screen protector. Because of that last point I wasn't worried about case compatibility, problems with the fingerprint reader (a big deal since I use the work profile and pay apps on my phone), the thing popping off my phone with slight amount of force (*COUGH AMFILM COUGH*), or getting a crack from sharing the same space as my car keys. Again, stressing the price point on this screen protector you really can't go wrong with it. I think it was under $7USD when I got it and I even got an offer in the box to get another protector for free by registering it. Along with the inherent benefits that go along with a film screen protector, there are some other good pluses for the ArmorSuit as well. Installation was very pleasant (and welcome!) after the whole circus you have to do with the likes of the AmFilm Ultra and the Whitestone Dome. I had no problems with it and you really have the ability to freely move it around on the surface of the phone as needed. The product description says that it ends up being bubble free and it's true. After less than a day there weren't any remaining. That adhesion is really, really good. Having used plastic screen guards on smart devices since the early 2000's, it was nice to finally come across one that neither leaves any bubbles nor curls up around the edges. That being said, if you need to remove it for whatever reason you can do so without much effort. Though I can't 100% promise you that this screen protector will absolutely work with XXXXX brand YYYYY model case I would be extremely surprised if it didn't. With glass protectors it is almost always the reverse. I really can't say that the ArmorSuit negatively impacts the fingerprint reader at all. If anything I have to say it reads much better than even the best glass protectors. The SPen works flawlessly with it which is essential if you use fully use it as intended (which I do). The elephant in the room, though, is that I really am not going to say that if I WERE to have my note 10+ (not insured) drop screen side down with only this to protect the screen that it would come out fine. Frankly, I doubt it would. True, my glass screen protectors would either pop off or shatter BUT in either case I would feel really pretty safe about the outcome about my actual screen. Yeah, I'd have to go through the hassle of paying for shipping for a replacement protector or flat out buying another one but even $60 (worst case) versus $300 to $500 for a screen replacement is a no brainer. That being said, ruling out drops or high force impacts I feel it gives very good protection for the medium it uses (regardless of the price). I do question how well the self healing properties of it work though. I put a fair amount of pressure on my SPen when I write and I can see artifacts written into the screen protector when an external light source hits it just right. Under normal usage it isn't noticeable at all and as I said earlier it doesn't affect the SPen functions negatively at all. Bottom line, if you're really careful about taking care of your phone and you do have insurance on your phone, seriously just get this screen protector and call it good. You will not get a better one for the price period.

I swear by these screen protectors. They are not the easiest to install, but they are the BEST once the install is complete. The installation accessories and documentation are good quality. They refer you to the manufacturer website to view a nicely detailed installation video which was easy to follow. I highly recommend watching this before doing anything. It instructs you to spray the solution on your fingertips and both sides of the screen protector then move it into place and squeegee the liquid away. It was incredibly simple and it worked fantastic. Now since we have curved edged phones you have to wait 15+ minutes then push down the sides. Here is where it takes some time and effort. You just have to keep working that edge down. They recommend a hair dryer if you're having trouble but I didn't need it at all. You just need patience and have to keep working it until eventually it stays down. I don't know if it's the method employed or the material that they use, but these protectors always come out perfect every time. No bubbles on the first try every time. Go figure! I even did the entire installation mostly one-handed (I'm handicapped). They only give one protector in the package, but they had an insert that says they will mail you a 2nd one for free. Awesome! I'll follow-up with an update if that turns out to be anything disreputable. They are made in the USA with a lifetime warranty. The quality is excellent! It's thin, yet very strong and doesn't interfere with touchscreen operation in any way. You can't tell it's there for the most part. I have nothing really negative to say about this screen protector. The installation takes a little time and elbow grease compared to other screen protectors, but it isn't difficult at all and has tons of room for forgiveness compared to other installation methods. I would highly recommend this product to my fellow Amazonians.