Bristan Monza Easyfit Mono Sink Mixer Black (MZ SNK EF BLK)

Bought this to replace a worn out mixer tap. Attracted by the Easyfit option but it didn't work for me as we have a cermic sink which is about 10mm thick at the tap hole, unlike metal sinks which are probably 1-2mm. As a result the easyfit option of rotating the tap base through the tap hole would not work. The instructions are clear on the alternative method and that worked once I had a second pair of hands to help, I couldn't do it on my own. I had to buy some separate flexi tap tails with pushfit connectors to get it plumbed in as that was the option from removing the old tap. The instructions say not to overtighten the tap tails into the tap (which is sensible), so I only did them up hand tight but when water was turned on I had a small leak so used a spanner to further tighten the tap tails into the tap. Unfortunately our sink has a radius curve upwards just behind the tap, so the ring which goes around the tap base is not quite flat and the gap will inevitably attract dirt and some mould which will need to be maintained, but overall I am very happy with a nice smooth new tap and no plumber bill for fitting.

Arrived quickly. Took the old dripping one out, then this one in. Works a treat and no dripping. 👍 value I thought was expensive for a tap. Looks the part though very shiny. After a few days pressure appears down but that makes it very quite.

Easy to install and really nice looking mixer tap. The only problem is the defuser that the water flows through does not give any mixing pressure so when you put washing up liquid into the bowl it does not give you a foam. So would not buy again.

All fitted and working fine

Better off buying a conventional fitting tap. If the sink stiffening plate is used you effectively fit the tap from undersink anyway. Secondly the tap is fastened from the top with two small grub screws. It is essential to ensure these are tight and then cocked regularly. If they loosen the tap could come off and water will just pour out.

This product replaced a previous mixer tap which leaked badly and I was unable to replace the ceramic cartridges. The bristan that replced it is a good quality mixer tap and was relatively easy to fit as the fitting instructions were well laid out in graphic form.

Bought this as my plumber recommended Bristan Easyfit to replace our dripping kitchen tap. One advantage of fitting an Easyfit tap is that when it does come to replace it, the installation process is much easier, quicker, and hopefully cheaper.This tap came with a 10 year guarantee. It is robust & well-styled. I was somewhat concerned by some of the negative reviews posted about Easyfit taps but have not experienced the phenomenon of the tap dripping after having been used.Bristan appear to be a highly reputable company with robust Customer Service back-up. So far, so good.

Definitely a high quality product. Fitted by a local plumber who recommends Bristan. You can feel and see it’s well made and comes with everything needed to install. Great discount too!