Pknight 3-Pin 1-Universe Bidirectional ArtNet/DMX512 Node, No RDM | ArtNet 4 input/output with OLED local setup, USB-C/USB PD 5V power and remote IP/universe configuration through DMX-Workshop

It works as expected. Fairly easy setup right on the screen and it worked with ShowBuddy Active easily.

Quick to set up and works great, wish it had DHCP but for the money I can’t complain.

you have just to change the ip of the qlc inputs to the pknight ones and it works perfectly

Easy and intuitive to connect and configure . Once setup complete it works smoothly and let you control wirelessly your pixars. It has a small led screen that is very useful when configuring. I would say it’s price bit high but still good value for the money.

You can’t beat this unit. Great product and price.

Muy buena

Programming lights is a major learning curve. Plenty of info out there on that. However once setup was able to control lighting via wi fi and not loose signal. There are 4 wireless guitars and 4 wireless iem and a wireless mic on stage with the band I work with. No drop outs communicating to this device.

When using this device for ArtNet<-DMX the Universe setting does not get stored. You have to reset it if the power is lost. All other setting seems to be stored when using the 3 sec push. After Working with the Tech on this problem it was completely resolved by fixing the Software. Unlike other Vendors they have a link to a chat line which makes trouble shooting much easier. Best response ever. I would give them a 5+ if I could.

Very reliable and good quality. Once set up, no worries.

I've moved all our lighting to these adapters. I use them with QLC+ mostly, in both single and multiple universes. They are really good performers. Once the IP is set on them, they are pretty much straight forward to use. I like they SO much better than the USB ->DMX adapters. Ethernet locks in. Since FOH usually has a network cable, most of these adapters I just put up in the truss or near the light stands and just run a piece of ethernet to them right on the network with our audio and other computers. Integrates very nicely.

Fácil de operar

Genutzt um erstellte UDP- Befehle über ein Mischpultes (UI24R V3.3) für einfachste DMX- Lichtsteuerung zu konvertieren. Stabiles Metallgehäuse, gut ablesbares Display, alles am Gerät selbst einstellbar, Eingegebene Daten bleiben nach Netztrennung gespeichert. Hilfreich ist die blaue Empfangs- / Sende- LED für das DMX Signal. Die Signalrichtung von UDP - DMX; DMX - UDP ist umschaltbar. Beim Art-Net ist Port 6454 (Hex 1936) zu verwenden. Benötigt wird ein USB- Netzteil, ein Adapterkabel auf den USB-C Anschluss liegt bei.

I'm using this via wireless repeater to connect a DMX controller to my wireless network during live shows. One I'd read up about Artnet needing a subset mask of 255.0.0.0 this connects senselessly into my network. Configuration is super easy. All the instructions are linked to a QR code in the documentation, and you can use The Artistic Licence software which is free. I may even buy a second one as currently I'm using an Air2DMX receiver. This means I have to fix the wireless channel on my router. It's much cheaper combined with a WiFi repeater than the air2dmx. Robust metal box, easy to setup and works well. I'm asuming other reviewers who have had problems haven't set up their network properly to pass artnet UDP signals.