Upgraded 15 Piece Bolt Extractor Kit,Impact Bolt Socket Set for Damaged, Stripped, Rusted Bolts & Nuts Remover,SAE & Metric Sizes,Cr-Mo Steel

Worked exactly as expected. Good buy

This set is high quality and works great. I tried 2 other sets for a bolt that was stuck in an intake and they failed. this set has so many sizes that you can choose the size for how bad the head is rounded. Original 8 mm bolt needed the 7.5mm extractor and it came right out. Very good set for when you run into the dreaded stripped bolt head.

It's perfect many sizes even half sizes works great

De buena calidad, gran resistencia

I had been replacing two wheel hubs on a 1999 Suburban (three bolts per hub) and I found out that the bolts heads had been rounded by the last shop that I paid to replace the hubs while on a trip to Florida a few years ago. I was able to remove all but one of the bolts on the first hub and I decided to order these extractors to get the last bolt out. I had soaked the bolt with penetrant for a few days, I used heat and everything I could think of. When these extractors came in, I tapped it on the rounded head of the bolt with a hammer and then with a two foot breaker bar, I was able to break the bolt free. The extractor socket that I used showed no deforming in shape or any damage that I could see. I ended up needed these extractors on the other wheel hub too. These extractor sockets are round (like regular sockets) and that is what I needed to reach the bolt heads, because you have to go through a hole in the flange of the wheel hub to reach the bolts. Some extractors will fit on a ratchet and they also have a hex head if you want to use a wrench on the extractor, I would not have been able to use that type, because those sockets are too big to fit through the access hole in the flange of the wheel hub. These extractors were exactly what I needed, and they worked perfectly.

These kits are absolutely amazing. They also work if you break the head off the boat you can get these on the bolt itself. I have removed 6 broken bolts. In my Jeep wide chamber, the heads and bolted off. And there was just enough to grab onto with some of these. This saved me so much hassle because a few of them were. Bolts that hold my doorhinges and they're on the outside of the Jeep on a Wrangler.Save me so much hassle.This is a great set well worth the money

What a lifesaver. I'm working on my wife's 2012 Journey and the small 8mm valve cover bolts were rusted and 3 were rounded off and in places I'm not getting to very easily, what do you do? Buy this item overnight shipping 49.99 plus tax so many sizes included, took 5 seconds and bolts came off easy. I used the 8mm socket and the 7.8mm socket and they worked. I like how it has odd sizes I've never seen a 7.8mm socket before. Serious gamechanging tool to have lying around. 100000% satisfied can't believe I didn't buy years ago!!!!!

It's a great set of tools to have as a mechanic at a reasonable price

Good quality

OMG!! Total game changer. They actually worked like a charm. Removed in minutes 4 bolts and two nuts that I had spent two days working on. Was initially skeptical because these are considerably cheaper than name brand equivalents, but totally worked out, on exhaust bolts to boot!

Works as it should !

I should’ve bought these years ago, saved me from so much grief with rounded nuts and bolts. A must have in any mechanics tool chest. The extractor kit is of good quality.

Easily removed seized bolts. Presoaking or preheat the first. Gently tap the bit onto the seized bolts and use a wrench.