Motorcycle Universal Windshield Windscreen Air Wind Spoiler Deflector Windproof Protector Fit for Honda Yamaha Suzuki Kawasaki BMW Fits 7/8" 1" 1 1/8" Handlebars (Clear)

Worked out nice for my 2025 Honda Rebel 500. Installation is straight forward but there are some tips to get it right. First, following instruction. 2nd dont tightening anything down too much but not too loose either. You eant to get everything in place and then ehen you move it will stay put. Once you adjust it how you lile, then tightening down but be sure to not over tightening anything especially the 5mm allen bolt on the handle bars. I learned from making this mistake. If you over tigjt the handlebar mounts, it will flange out the clamp that holds the metal rod and the rod will slide up and down freely. If not over tighten the rod stays in place and will take a little force to move up and down which is what you want. Tighten it slowly them periodically check if the mount rotates. As soon as it doesnt, stop tightening!

Easy to fit and works well. Good price. Very stable as is or you can add some lower brackets if needed.

Hardware was nice and kept everything in place. I got the dark one and it’s not transparent at all.

I was unable to mount this and had to return. Screws in plastic did not work and made me very concerned.

For the price, it worked good on my Honda grom. But the glass is a little Blurry and the mounting hardware is all plastic and feel like it will strip if you tighten it too much. When driving it wobbles a lot so I had to drill a hole and zip tie the bottom for more stability. It does it’s job for the money.

Works well on my Metacycle electric motorcycle. Reduced wind buffeting across the chest almost zero at 70 mph. You need 2" of space on the right and left on the handle bars to mount the split rings. My only gripe is the screwing together the split ring mounts and keeping the spacers from dropping out when you are doing it is a juggling act if you are by yourself.

Initial impressions were great but things quickly fell apart once the windshield was installed on the bike. The mounting hardware is cheap plastic that flexes. The spacers for 7/8 or 22mm bars don't allow for a tight clamp. This means that the shield just flaps around in the wind and slides backwards since there is one bolt that tightens both the bar clamp and the clamp on the extension rods for the windscreen. The windscreen itself is like looking through a drunk driving simulation googles. Very blurry and wavey so if you plan to use this for an actual windscreen instead of a wind deflector look elseware. I had to shim both the extension legs with zip ties to keep them from moving around and the bar clamps with some electrical tape to get a tight clamp on the bars. One of the plastic ball mounts kept popping out of the windshield so I just ended up JB welding the entire thing in place.

Way better than expected! If the hardware wasn’t so cheap I would’ve given 5 stars without hesitation. I ride a 2019 HD Heritage Classic and I always disliked the look of the big windshield it came with. This is much smaller and more sporty in my opinion. For the price you won’t find a better windshield. I had to modify the hardware for my application by trimming the solid metal bars with a hacksaw. But that was for my bike. Glad they were too long and not too short. Installation was easy. I also had to place small washers in the mounting brackets and hockey take to my bars to keep them from shifting. All solid now. If you are handy this will work out. Now aside from the hardware the windshield itself actually works great! The performance was excellent at freeway speeds there was no buffeting and the deflection was perfect. I just ordered a second one in dark smoke. Be patient when installing and do not over tighten! The plastic parts are very soft.

Great product, easy to fit , keeps the wind off your chest ,

Installed this onto a DRZ400S. In the picture, I had it too upright causing bad wind buffeting on my helmet. I lowered the angle and brought more up the headlight/cowling. Much better. Windshield looks good, this material (won't bend in the wind). Easy to install. Once I tightened everything down it's solid. Also note I made custom brackets for the lower part... had to drill holes.

Fixation cheap en plastique

Said it would fit my 2013 Kawasaki ER-6N but it does not-brake reservoir in the way. Contacted seller and eventually refunded my entire purchase.

Je l’ai installé sur un Canam outlander 1000, Ça m’a permis de ne pas enlever les protège mains, et c’est parfait et pas cher..