🔌 Power Up Your Safety Game!
The ACEIRMC 1S 3.7V 10A 6MOS Charger PCB BMS Protection Board is engineered for 1S Li-ion/LiPo battery cells, offering essential protections against overcharging, over-discharging, short circuits, and overcurrent. With a robust voltage range of 2.5V-4.2V and a user-friendly design, this board ensures your battery management is both efficient and safe.
| Current Rating | 15 Amps |
| Input Voltage | 3.7 Volts |
| Output Voltage | 5 Volts |
| Energy Specifications Met | CE, FCC |
| Color | 6pcs |
R**G
what was needed!
So far as Described. I know the vendor is not a manufacturer. So I wont hold my breath. However, this configuration is difficult to employ, say on a cylindrical cells. Some use a common Ground this one uses a common positive (B+ and P+). I spot welded tin strips to the contacts on either side, then ran the strips to the battery contacts on an unprotected cell, spot welded to the battery. Negative I taped off totally, covered exposed tin and most of the PCB. 3rd tin strip I ran 2 solid core 22ga wire to the P- from the strip, this formed a new Batt Neg. I would love a better set of contacts for this last part. Tested in a charger and it recognized correctly. Very pleased with behavior. Also like a variant with a 3V to 4.2V firm range, since the typical 1S operates outside spec.
B**.
WORKS AS ADVERTISED
Great product..works great.havnt tested all of them but the 3 I used all seem to work fine...well worth price
ترست بايلوت
منذ شهر
منذ شهر
