PrimoChill Water Cooling Cleaning Prep Kit - Existing System

Advertised as an all in one kit but reality is it's more like take the one you need use it save your money the reboot is 2 drops of dawn soap with distilled water the rad clean use 50/50 water/ vinnigar run it for max 1 hr, empty loop , use the soap mix with distilled water unit run it for 24-48 hrs drain and flush out again make sure all soap is gone, then refill your loop with distilled water/glycol solution, debubble, and top up back to work

I was told by a micro center staff that I needed to replace my complete custom loop worth over 2 grand with parts and labor. I used this set and it did the trick. I had so much gunk built up in the cpu block and radiator I flushed it 3 times and got it all out.

Managed to get all the dye out of my old parts. Went from clear when I first filled up my loop to almost the exact same shade of red as the old coolant I was trying to get rid of.

I used this kit to flush and clean an existing loop. It all seems to be acrylic safe with the EK CPU block and Corsair GPU water block that I have installed in that loop and PETG tubing. There isn't much information available on the package but if you read the bottles it has a URL to go to PrimoChill's YouTube channel where directions for use for all of these products is provided. I would recommend using the reboot, then removing the radiators from the rest of the loop to use the radiator cleaner, and then put everything back together to run the prep product at the end. Sorta tedious when you could just tear down each block and clean the insides, and then flush with distilled water but I suppose you could run this without disassembling your loop if you really needed to do a quick and easy clean and refresh.

My brother says it runs like a dream and he is very comfortable with this product!!