Phenolic Zero Clearance Insert for Delta Uni-Saw Contractor | Large Grizzly and Other Table Saws with a 13-3/8" x 3-3/4" x 1/2" Throat Plate Opening

Fits like a glove! Takes about a minute to fine tune the adjustment screws and remove all play and another couple to fine tune the level with the table top. Phenolic inserts are the only way to go on any table saw, I even have them on my portable. They’re smooth, perfectly flat, strong, stable, and long lasting. Unlike cheaper MDF or even polymer. Zero clearance not only makes cleaner cuts but also makes the saw safer by not allowing small pieces to fall into the blade opening. I bought 3, 1 for straight 90 cuts only, 1 for beveling, and 1 for my dado blade setup.Highly recommended this product.

I have an older delta cabinet table saw and this fits perfectly! Easy to adjust for flush with table saw top. Great price.

Fit me into saw very well. Not to long, short, wide narrow, thin or thick. I liked the fact I can adjust the insert in the x, y, and z planes for a perfect fit. Also the relief cut on the bottom allowed me to make the plunge cut with the standard 10" blade I rip with. On thing they need to fix is the alen wrench they send for the z adjustments. It's too small. It measures a tad under 3mm. A 1/8 wrench is what it took. I will buy again.

Perfect fit for my old delta table saw.

Used this on an older Craftsman Delta table saw. Worked great to replace the original metal insert plate that vibrated badly, clanked and made noise. Even with allen screw adjustments fixed the plate still vibrated. This plastic insert works great doesn't vibrate around like the old metal insert and was easy to mount the MICROJIG GRR-RIPPER SP-2TK Mj Splitter Steelpro Tk. This was a great setup to eliminate the old Style riving knife affixed to top of saw table. Both of these really tuned my table saw and helped to true the blade angle with reference to the fence, enabling better straight cuts creating square dimensional lumber.

I have delta contractor saw. This insert fit the opening perfectly. It has adjustment screws in the side and the end to eliminate any slopy in those directions. It also has four screws to level the flat surface of the insert with the table saw surface. When I started to cut the opening in the insert and the insert was level with the table saw top my saw blade was touching the insert and would not rotate because it got stuck in the insert material. What I did was use the four leveling screws to raise the insert so the saw blade could spin freely. That made it easy to raise the blade and cut the slot in the insert for the blade.

Fits my older Craftsman 152 series 10" Table saw with a 13.5/3.75 opening. Sturdy product, good instructions. A+

No issues

Very good quality insert plate at a reasonable price

Inserto de muy buena calidad, me quedó a la perfección en mi sierra de mesa DELTA 36-670.

Was able to select exact size plate required...can be used for single cut or wider slot for angle cut...

Excelente justo lo que necesito

Supposed to be red but was white on top... Fits perfectly.