معلومات عنا
دعم العملاء
احصل على التطبيق
قم بتوجيه الكاميرا لتنزيل التطبيق
حقوق الطبع والنشر © 2024 Desertcart Holdings Limited
🏍️ Elevate Your Ride with Style and Precision!
The CNC Aluminum Φ 37MM Clip-ons Handlebar replacement is designed specifically for Kawasaki Ninja models, offering a perfect blend of style, adjustability, and stability. Made from high-quality 7075-T6 aluminum and featuring a sleek anodized black finish, these handlebars not only enhance the aesthetics of your bike but also provide a customizable riding experience with a height adjustment range of 25MM or 35MM. Ideal for riders seeking both performance and visual appeal.
| Manufacturer | Fullibars |
| Brand | Fullibars |
| Model | Ninja 250 handlebars Black |
| Package Dimensions | 32.2 x 11.6 x 5.8 cm; 945 Grams |
| Manufacturer reference | HB-NJ250B |
| Exterior | Aluminum |
| Manufacturer Part Number | HB-NJ250B |
| Item Weight | 945 g |
J**.
Use. Locktight. On every screw!
These were perfect, they looked amazing on my ninja 400, install was super easy, then the ends fell off after one ride with them, definitely suggest locktight even though it makes any future encounters with needing to adjust it painful, low key wish I could just buy the end pieces cause I still love the look of them but I can't.
R**S
awesome
these are great! really look good and the manufscturing is rad. really good product thanx
し**ば
各種擦り合わせが自分でできる人向け
左スイッチボックスの固定穴の位置が若干中央側にズレており、ボックスに着けるとグリップが5ミリ足りなくなる上に、クラッチセンサーのカプラーと干渉する。穴を開け直すか突起を飛ばしてフリーにしてから固定し直す等加工が必要。バーエンドのネジは径の細い物（m6かな）が使われており、純正は付かない。好みのバーエンドをつけたい場合は加工が必要。パーツカラーは緑のみ。イニシャルアジャスターはハンドルバーに干渉してスクリューが回せないので飾りにしかつかえない。若干のフォークオイル漏れがあったため純正にもどし、トップカバーを付けた。耐久性は付けてみたばかりなのでわからないが、重量もありしっかりしている印象。振動も純正とあまり変わらないかな？これだけのパーツがセットになっていて、ペンスケの半額であることを考えればお得なのでは？
T**I
Good Quality Finish
Couple niggly points. The mount does not sit flat on the top of the triple clamp, as the triple clamp is not flat. Only out by a millimeter.The mounting bolts hold it in position well. The bars themselves are not quite the same diameter as the stock bars, so the switch blocks on both sides as well as the clutch mount needs a wrap of insulation tape to enable them to be done up tight.The new position of the bars does put you in a bit of a lean forward pose, but I find it comfortable.Over all, very happy.
M**A
Nice but be ready to modify!
This has been mentioned before. The bars are great looking and mount to the ninja 250 really easily. The problems start when you are putting on your controls and levers. The bars are thinner than the stock ones. You will need to add shims, tape, or whatever to get everything tight so they don't move. Nothing is worse than pushing a button and having the whole control box slide out of place. The only control that tightened up without any spacer was the brake lever. Everything else didn't even come close to it. I used a single layer of an aluminum can for the clutch lever and 3 layers of bicycle tire for each of the control boxes. Even with drilling the holes for the peg on the control boxes left them to jiggle around. A little bit of a pain in the butt.
ترست بايلوت
منذ أسبوعين
منذ شهرين
