Spigen Ultra Hybrid Case Compatible with Nothing Phone 1 - Space Crystal

Having bought both the official NOTHING black and clear cases I can confirm that they are both absolutely hopeless. 1) They are absolute fingerprint magnets leaving them looking disgustingly vile at all times. 2) The TPU starts sticking to the glass back in places within days of using them which in turn leaves weird 'oil like' ghosting all over the back. The only way to solve this is to lift the case away from the back panel to let air in before reapplying. I presume that this is a problem with all TPU cases. I've just bought this Spigen case which has solved all these issues perfectly! The TPU smoke tinted frame is extremely sturdy but pliable enough to allow easy removal and application of the case. The clear Polycarbonate back is firm and does not stick to the back of the phone. It is also far less of a fingerprint magnet than TPU backs are. This case design is everything NOTHING should have employed on their cases in the first place. I can only highly recommend this case!

I've had other case's & they were ok but this is quality. Yes it's a little more expensive but it fits like a glove & looks great so it's well worth the money! Doesn't affect the screen protector either. Would highly recommend

Good quality. Dust and dirt does get behind it which spoils the look.

I've had Spigen cases before and they've provided the best protection, and saved my phone's from heavy damage. This case is no different, great Spigen protection for the unique nothing phone. You still get that glorious LED display without the worry of the clear phone backing becoming scratched or cracked. However, I've noticed two flaws with this case to keep in mind. Firstly, although I keep my phone on its front to make the most of the LEDs, the case back is already quite scratched after 2-3 weeks (not surprising). But, it has also developed indents from small debris (e.g. grit) leaving a pitted look in places. This is only really seen under direct strong light, most people will never notice. Secondly, the back is a fingerprint magnet. It's quickly made greasy, smudgy, etc. Again, unless under direct light it won't be overly obvious and is easily removed with the wipe of a cloth. Lastly, the biggest, potentially avoidable flaw. The back of the case is not flush with the phone and leaves a small space between the two. This allows dust, hair, grit, etc to get under the case and if you've gone with the white nothing phone it gets obvious quickly. Furthermore, the grit will easily scratch the back of the actual phone if you go to remove the case to clean beneath. So I recommend you get a protective film for the back of the phone and then add the case to avoid scratches. Slightly overkill but the idea is to preserve the phones most prominent feature. Overall, this is still likely one of the best options as Spigen do great cases. Just let down some by the gap between phone and case.

Very, very good case, hasn't yellowed after a few months use and does well protecting it from drops. It is not hard to apply and remove from your phone despite its rigidity. My only real criticism is that dust can accumulate around the camera, but I would rather have a little dust that than a yellowed piece of junk that gets covered in fingerprints easily

The case is very solid, it has a crystal clear back of a more plasticky material while the sides feel more like a rubbery material. Fitting isn't as easy as the other cases but it's not too difficult to fit - you just have to use a bit more force than the usual. The phone obviously doesn't good or feel as good as if it was naked but the plastic material on the back shows clearly all the design and feels very solid and that it will protect the phone on an eventual drop (haven't tested that yet ^^). The camera holes let dust get inside but I think that's unavoidable, so you'll have to remove the cover and clean it from time to time. I'm really happy with the product and would definitely buy it again if I had to replace it.

With over 2 years of use, this case has been... middling. The positives: - The rear portion of the case didn't yellow, like at all. It would get scratched but something made of plastic will tend to do that over time. - The feel was crack on, it protected the phone, didn't impede function at all and was easy enough to remove - The grip was what you would expect from a slightly soft plastic. It worked. The negatives: - After about 6 months of use, the part of the case that wrapped around the edge and the part that covered the back separated. While not a total flaw, it would still sit around the edge and not fall out. But if dropped, it would like dropping a lego set or an old samsung phone and the constituent parts would scatter to the wind. - While the back didn't yellow, the border piece definitely did and turned a yellowy-brown which was not too appealing. Overall, for the price, it wad fine, and served its job. Though I cannot recommend this case if you personally can find a similar one at the same price.

Spigen live up to their reputation, quality product and precision made, can't fault it and couldn't recommend a better case! A nice crystal clear hard back which at first comes with a protective film applied that has to be removed, so just from there you know you're getting a product made with care, perfect fit with cut outs in the exact spot, this is the case to get.

Better than original nothing case in every aspect. Can recommend.

Bought this about1,5 year ago. Clear plastic back is a bit scratched, but that's expected. Dropped the phones a couple of times, was 100% protected. Phone looks new under the cover.

Good case! With a transparent blue colour when you turn on the glyph!!

Antes de comprar esta carcasa probé un par,la primera era una imitación de esta misma por unos 10€ se notaba que la calidad era bastante inferior,las cámaras quedaban muy desprotegidas(sobresalían de la carcasa) y era demasiado rígida,después probé otro modelo que tenía muy buena pinta con el mismo precio que la de spigen,muchas zonas en relieve para proteger el móvil pero era demasiado blanda,se me colaba demasiado polvo y a los 10 días ya se estaba amarilleando,me recomendaron está de spigen y la verdad es que va genial,las cámaras quedan un milímetro dentro de la carcasa,los marcos se agustan mejor y se cuela menos polvo,además se nota que está muy bien diseñada,aparte de que deja ver muy bien el diseño de el teléfono ya ha tenido dos golpes bastante gordos y no le ha pasado nada,diría que es la mejor,otras carcasas que se parecen mucho las encuentras en páginas chinas por 2 o 3 euros y la calidad es bastante inferior

ピッタリとフィットしてボタンも押しやすく反応も良いので使いやすい、他よりチョットお高めですが満足です。 透明度はガラスに比べれば落ちるので背面の細かな造形が見えにくくなったのは残念です、本体が白モデルなら問題ないかも？。