Ferrule Crimping Tool Kit, AWG 23-10 Self-adjustable Ratchet Wire Crimping Tool, Crimper Plier Set with 1200PCS Wire Terminals Crimping Connectors Wire End Ferrules

I have several projects where I had to use parts with screw terminals, and historically I've just put stripped wire ends into the terminals and tightened them. It is maddening how poor of a connection that makes in most cases, just moving the component around a little bit is often enough to cause the wire to pop out. Crimping a ferrule onto the wire makes them function so much better, and this crimping tool has done the job well, I can see nothing to complain about. Crimping is easy and it feels like it will last quite a while, despite the budget price. Great tool

If you need to crimp your stranded wires with wire ferrules, this is the one. It is very easy to use. Just slide in the ferrule into this crimping tool, then slide the stripped stranded wires, give it a hard squeeze. That's it, you have a nice crimped ferrule for connecting the circuit breaker terminals or any screwed in terminals. It will make your life a lot easier when compared to soldering the wire. Definitely recommended if you want to some times.

It works beautifully and is easy to grip, to squeeze, and to use overall. If you have it adjusted right, it makes really solid contacts. It's an excellent value.The one minor detail? You need a #2 phillips screwdriver, and you need to completely remove the screw to adjust it. And you need to take care not to cross thread it each time you replace the screw.Other than that little detail, this would be a 5 star review.

Got these to help connect bare wire into terminal blocks for my solar charge controller as well as some smaller arduino projects. The crimper works really well with really small gage wire (22AWG) as well as larger 10AWG. The crimper works best when you select the proper wire for the crimp connector. If the wire is too small it will result in a wonky in inadequate crimp. Overall I'm pretty impressed with clamping strength and the connection.

Pretty simple and straight forward so there isn't much to say other that it did it's job perfectly. It did a nice clean crimp and I was not able to pull the ferrule off afterwards. Two thumbs up.

This crimper works well, as far as I tested it, as I did not test the full advertised gamut of wire thickness. AT 16 AWG it ensures a solid, reliable bond of the ferule to the wire. 22 AWG is a breeze, and perfect crimped area of bonding. The six jaws make for less stress in the ferule material, it is hard to mess up with this crimper. Comes without instructions, all info on using it is on the amazon product page.The build quality is good, this tool feels sturdy. The handles are made of some rigid plastic, I would have really liked a material with better grip, and also more width to these handles for easier use.

It does what it should do. It work great . I looks and feel great in hand.

This feels well made. I like the he. Instead of the square, I just feel like it’s a better connection with smaller gauge wire. Great tool! Highly recommended