Gigabyte GP-ATC700 AORUS CPU Cooler

I'm not sure what this obsession with zero sound is. But if that's not a giant concern, this dropped my 85-95 gaming temps to 45 when at higher resolution. Also let me OC .3 higher stable. I love it. Its so big I had to cut out a chuck of my case window to fit it. But totally worth it.

This thing hear is massive. Plan a case around this bad boy. And it’s worth every penny. The only thing I dont like is the size. The thing I like Most, Lmao up the size, the cooling ability the look. But try not to take it apart. Oh and there is a tie Wire don’t take it apart. You will regret it. I speak for experience

It's a great cooler and does the job well. I put it in a Be quiet pure base 600 and it just barely fits but it needs to be beefy in a case with such restricted airflow. Had an issue after initially installing the cooler, the bracket that holds the cooler flat across the CPU is secured by only 2 screws and they come loose easily. As it was for a new build, it was being moved around a lot but it still could benefit from either some threadlocker or just adding more screws to prevent movement. Very quiet though I like the look of it, but could not find out a way to control the RGB lights on it. I like everything red. I'm still looking for device controllers that can handle it, but Gigabyte isn't great about RGB controls apparently...

This CPU cooler keeps my CPU very cool, but since it has to cater to both AMD and Intel CPU's, the installation was a bit more complicated than I would have liked. But it all worked out fine in the end.

I bought for Gigabyte Aorus Z390 Ultra and this cooler is blocking my Memory slot 1, if u plan to add all 4 RAMS do not think about buying this. also most difficult to install and after install very difficult to access other MB connection CPU Power, Systems fan etc. anyhow i manage to complete the machine after spending few hours.

Aourus CPU cooler is monstrous and I needed a big new case. It is a little bit pricey, but it keeps my Gen8 i3 8350K unlocked CPU cool between 26-30 Centigrade. The two fans are very quiet and the RGB sync nicely and I can control it with my Gigabyte Z370 wifi-op mobo App Center. I didn’t go with water cooled, fan based in my opinion last longer and no head ache in the future.

I ordered this so that I could have my fully auros build as I currently have the GPU, Mobo, and ram. I read reviews that said the temps stayed cool so I went from a AiO to this. Horrible decision. Long story short I run a i7 9700k idle at about 30 and when I game it'll run up to 65 , with the gigabyte cooler my idle was 43, and gaming for 5 minutes it hit 90+ non overclocked... I reinstalled it 3 times cause I thought it was user error, nope. I used 2 types of thermal paste including what came with this, nope. It was just not great. If you have a lower end CPU this might work for you. Also the install is ridiculously hard, and if you intall it inside the case you have to take the fans off and the top cover and GOOD LUCK trying to put the top back on. One thing I can say I use a z390 aorus master and this did not cover my 4th ram slot so im not sure what the others are experiencing in this regard. And last thing, this might be needless to say but this will not fit if you run a vertical GPU.

Installed in an all Aorus build with a delidded 8700K and was able to achieve a 5GHz overclock. Installation was easy enough with my only concern being memory clearance. The heat spreaders on my Aorus memory were a bit too tall so I had to manually adjust the cooler's fan placement about an eighth of an inch to allow for clearance between the motherboard and the cooler. If your system is only using 2 memory modules this will not be an issue.