20 Metal High Quality Domestic Sewing Machine Bobbins WILL FIT, BROTHER,TOYOTA, JANOME CLEAR

I bought 4x packets (20x Metal bobbins per packet, so 80 pieces all together) from seller: BargainShop_London.And, I am very sad to say that they are very poor quality. 66 of them all are all bent out of shape and will not work in a sewing machine. Only 16 (that's a low 20% of the whole lot) are usable, and even those are still not welded together perfectly straight.Very disappointed!

I orded these metal bobbins because the plastic ones snap when trying to move them on the bobbin winder towards the spool ready for winding. Out of the20 bobbins, only 3 fitted on to the winder spool, and out of the 3 that I could use to wind thread on, none of them worked properly when sewing. Around the central hole on the top and bottom, there is a ridge of metal that sits very slightly higher than the main bobbin. When I started to sew, after about 1-2 inches of sewing, the top thread caught on this ridge and wound round it, causing it to stick and stop the machine, leaving me with a massive knot of thread on the underside of the material and inside the bobbin compartment. I couldn't get the material away from the needle and had to carefully cut the cotton to free it. This was extremely difficult to do, and I broke several needles and ripped some of the material trying to free the rucked up fabric from the machine. This happened several times with each of the 3 bobbins until I gave up using them. I was so frustated, because it states they are suitable for many makes of machines, one of which is a Brother, which I have. It is only 3 years old so it's not ancient or made differently, and I presumed compatible with these universal bobbins. I don't recommend them, they caused more problems than the plastic ones and ruined several pieces of work and broke my needles. EXTREMELY DISAPPOINTED.

If you've got a half-way decent sewing machine you won't want to put these bobbins in it. They are full of burrs with lots of sharp and snaggy bits and are very obviously cheaply made of substandard materials. Some even have a double side where they've stuck two pieces on together. After waiting nearly a month for them to arrive from Hong Kong they've gone straight in the bin. I know they weren't expensive so thought I'd give them a try based on some of the reviews but don't bother.

DO NOT BE DECEIVED . How sad I am to receive these bobbins, a waste of good material and even my pound! Inspecting them closely they are Rusty ?? On the inside as if they are old having previously been used. Even worse is that they are all Miss-shapen and wonky, some places the metal's not smooth, with nasty bits that would potentially cut your finger, and looks like it's been hit with a hammer ?? I am not one to give things bad reviews, but please don't waste your money. If you're not fussed about damaging your machine then you can buy them... but I'm sad... :(

Absolute rubbish - at least half of the bobbins were misshapen and totally unusable, such a shame as the actual metal was nice.would NOT ever buy again!!

Low cost, expected low quality and that is exactly what I got. Some I can't use as they are misshapen. I have a Toyota machine and they only just fit onto the winding spool to fill the bobbin. Think they are destined for the bin. They do hold a lot of thread but they rattle around in the bobbin casing badly and as such leave you with all sorts of seemingly unfixable tension issues.

This is the worst product I have ever purchased. over 50% of these and I bought 2 packs were only fit for the bin! Poorly made rubbish, distorted so that they would either not fit on the bobbin winder at all or would fit partially one way up but the central hole to fit the bobbin winder spindle then became smaller so that it could not be pushed down fully. the other 50% do fit on the bobbin winder but there are very few of them that are not bent or distorted in some way...very poor manufacturing!

Sewing machine bobbins in metal - all 20 in order deformed or damaged in some way. I would not risk any of them in my sewing machine. Very disappointed.