Gorilla Epoxy 25ml

This stuff is fantastic for securing items together, I've used it so far on airsoft red dot turrets of various alloys, and on plastics and if you mix it well enough for a minute before a thin application and applying the items together with presssure ie clamps you get a solid result.My once broken in pieces vector optics red dot sight now has a functional windage turret thanks to this product, I've also used it at work as a electronic repair technician to perform solid repairs on a few polymer products which needed bonding and reinforcement that could not have pressure applied and it's held up very well.One/if not the best general use epoxy i use and will happily recommended to anyone else!It mixes well, adhesion is fantastic and it can be applied to a wide range of products, for its value and price you'd be a silly sausage not to get some of this as it dries and cures fully very quickly and is very applicable and easy to use.

Good quality, mixes well, sticks within 5mins, doesn't have a strong smell. Quite thick consistancy when mixed and good control on amounts you need. Extremely strong when fully cured. Used to bond petg printer filament together.

Seems good so far. I didn’t apply enough the first time so took my time and was successful second time around.I’ve given it 4 stars because I want to see if it hasn’t dried up or the cap doesn’t get “glued on” by the next use.If both these things are good I will give it 5 stars.

Easy to use eproxy. Easy to use with the two parts separated in their own tube. With one plunger to make sure you.get the same 1:1 mixture. The packaging is the mixing tray and there is mixer/spreader in the plunger, so you have everything you need to get going.As it is a quick drying eproxy that is clear when mixed and there is not much mess as it is a thick mix, if there is a bit of drip as long as itnis wiped up right away it is fine. The cures within 5 minutes to touch dry and I would.givw it 24 hours to fully cure.This is good for small repairs or strong glue is needed. I fixed a few hairline crack on a marble chess board and to re attachment the fort brass legs to the marble and i had plenty left over. So I did what any good DIYer does I glue another half a dozen things together what I had been putting off. And everything stuck like a charmValue for money is good if your.doing a small one off job for sure.

Heavy duty.

I snapped a tree branch cutter so there was some metal that needed to be glued back on.This was easy to mix, I like that you get a spatula included and despite having 5 mins to mix and apply I had plenty of time to affix the broken pieces together.The next day they do appear to have bonded ok. The fixing appears strong so fingers crossed this will resolve the issue.It does indeed dry clear.Application was fairly straight forward. The cap you will need to rotate after breaking the seal to reseal.You get a lot of glue so hopefully it will last in the tube since it is not mixed.

does the job well , easy to use andim able to fix few things at home.thank you

I recently used this Gorilla Epoxy for a DIY repair project, and overall, I’m very impressed with its performance and versatility. I needed to fix a broken ceramic vase, and the epoxy delivered a strong, clear, and lasting bond.One of the things I appreciate most is the dual syringe design. It makes dispensing the resin and hardener in equal amounts straightforward, ensuring the correct mix every time. This design, along with the easy-to-use syringe, minimizes waste and makes the whole process feel very precise. The clear finish it dries to is a big plus if you’re working on visible surfaces.The working time is generous—about 5 minutes of open time—which allows you to reposition parts if needed. I found that the epoxy begins to set in around 5 minutes, with a noticeable firming up at 30 minutes. However, for full strength, you should clamp or support your project for 30 minutes and let it cure completely for 24 hours.For best results, make sure to follow the preparation instructions: clean and dry all surfaces thoroughly, and lightly sand smooth areas to improve adhesion. Also, if you’re working in a warmer environment, be aware that the epoxy might set a little faster, so plan accordingly.A couple of things to note: While this epoxy works excellently on ceramics, stone, metal, and many plastics (after proper surface prep), it isn’t recommended for PVC, polyethylene, polypropylene, or certain types of rubber. Also, mixing and application require a bit of attention—once the reaction starts, you won’t have the option to pause, so it’s best to have everything ready before you begin.All in all, if you’re looking for a reliable, crystal-clear epoxy that fills gaps and bonds uneven surfaces, this product is a solid choice. It’s been a game-changer for my household repairs, and I’d recommend it for crafting or any project where a strong, durable bond is needed.