LiquitexProfessional Acrylic Ink, 1-oz (30ml) Jar, Titanium White

Works great through a 0.3mm airbrush. I put a couple of drops of paint retarder for two dropper fulls of dye and it can get very thin lines at around 25 psi. Spraying carefully, I managed to get a gradual buildup of opaque white on details only 1mm wide without speckling or spider webs.

Love liquitex inks. I use them with my dip pen and they work great, very little bleed, flows smoothly, few ink blots. When I first got it, I thought the color was really thin but once I shook the bottle the color that had collected at the bottom all mixed back in. Do have to shake it before each use and may have to use multiple layers to cover up a darker color like black. This is also acrylic ink so is waterproof though will bleed lightly with alcohol markers.There is one of those droppers in the cap though which is the most annoying thing. I just use the ink right out of the bottle and having to find a place to set the dropper without getting ink everywhere is kinda a pain.

I purchased this as it is great for using in an airbrush with no additives needed. Just prime black and airbrush with this stuff on your miniatures for a great start. If it sits for some time it’ll need a shake, but that’s most products like this one. It’s lasted me awhile and I will buy again once I run out

High pigment count it's just the best goes on smooth and one layer can build the white you need.also you can use it to do grey scale gradients. It's the best

This is very white. Definitely check it out if you see it in a local shop. Or try the six pack on amazon which is boxed with 5 other colors.Unfortunately, it is also poorly packed. The small 1oz glass jar with a rubber stopped pipette top tends to get pinched/bashed in shipping. I've ordered three of these in total (different colors), and 2/3 has leaked. The black was shipped in a yellow bubble mailer and leaked not only into the package, but soaked through a corner and no doubt gummed up USPS gear somewhere on the way. The white was shipped in a box with other items and was bubble wrapped by itself in there. The bubble wrap seemed to have been tight and folded over so I thought I was going to be leaving positive feedback on that, but no, it leaked too. The silver I ordered came through OK, but while Meatloaf says 2/3 ain't bad, 1/3 shipping success is bad. Good product (I assume based on the spills), but the purchase experience through Amazon on this was a rare frustration since, with two failures, I have to actually send a broken jar of ink/paint back through the mail. At least I have a ton of loose packed bubble wrap from other AMZ orders to pack it safely.

I use this as white paint on my wargaming miniatures and it is perfect. Great for broad areas or detail work. A pure, crisp white with far better coverage than most miniature specific paint brands. This is my go-to. Not cheap, but well worth it since I do not use a ton of white anyway.

It splatters well on my cards foe snow.

Works wonderfully through an airbrush. I use it for zenithal highlights mostly. Will be buying more when my current bottle finally goes.