Monitor and Laptop Mount, Monitor Arm with Vented Tray for 13" to 27" LCD Computer Screens and Notebook up to 17 inch, Fully Adjustable Laptop Mount Stand Holds up to 17.6lbs

I was looking to hang up a monitor, but then I found this. I really like the idea of getting my laptop off the desk and out of the way. It now hovers above and out of the way clearing up my desk space. The benefit is that I can stand up and use it, if I feel like standing. Other than that, my monitor is connected and leaning over my desk.I was looking for several things on these types of stands. First was the cost. It was on sale in the $25 range. Secondly was the size. This says it holds a 17" laptop. It does, but the laptop sits outside the plate by 1-2" per side. It still works. I also liked that this one had vents on bottom as opposed to the tiny holes on the other brands. The laptop mount has a velcro strap to use in case of falling. You really should tighten the screw at this point the most. The laptop could potentially swivel downward and drop the laptop. I adjusted the angle, held it, and tightened the screw pretty tight (don't strip it though). It is holding fine. You'll really only tighten two areas, the arms at the main bar (2) and the angle points at the VESA mounts (2). You get 2 sized Allen wrenches for this. The strap can cover the laptop vents if it's placed in the rear like the photos. I recommend keeping your laptop vents clear ALWAYS. I slid the strap forward just passed my vents and allowed it to cover areas that kept the keyboard, ports, and vents clear. It works.I was also looking for the arm length. One other product in this price range had one short arm (didn't flex) and one normal one. This one has 2 same-sized flexing arms. I do like the clips for wires that go on the arms. They're wide and work well. This has 2 clamps, but I just used the typical clamping type (not the hole in the desk). It is nice, it seemed to clamp without causing any damage or anything (I tried before swapping to a taller one).The cons, well... it's the height of the main bar. I ended up using an older mount bar that I had for a tv. It made the bar about 5" higher. This JUST allowed my 27" monitor to clear another little 16" monitor below it. If your goal is just to lift your monitor off the desk, this bar will reach that. If you're trying to fit things under, you may need a different model. For most people, this should suffice just fine.This thing is built solid. It came with all tools needed and they slide into the clips for future use. You get two VESA mounts (one on the laptop stand). The mounts are cool as they slide on so they really cannot fall off, even without the retaining screw. I love the way my desk looks now. Sorry, no photos. A man's desk is his sanctuary and it cannot be posted on Amazon 🤣 Good luck though.

The UPGRAVITY Monitor and Laptop Mount is a versatile and practical accessory for anyone looking to optimize their workspace. This mount is designed to securely hold both a monitor and a laptop, allowing for a dual-screen setup that enhances productivity. The mount is made from high-quality materials, ensuring durability and stability. It features adjustable arms and hinges, providing flexibility in positioning the screens at the desired height and angle. The installation process is straightforward, and the mount can be easily attached to a desk or table using the included hardware. Additionally, the UPGRAVITY Monitor and Laptop Mount has a sleek and modern design that complements any workspace aesthetic. Overall, this mount is a reliable and efficient solution for maximizing screen space and improving workflow

Everything is Sturdy. The Arms rotate and swivel very well. The laptop tray is solid as well. The Accessories match my monitor. The only problem I have had was I couldn't get the C-clamp to fit my desk. I contacted the seller and they said they are sending a bigger one. Never expected anyone to do this. This is great service.

The media could not be loaded. This is a pretty decent stand. Looks good and feels solid. It has few little flaws - I recoded a video to explain the details. In short - the arms might not fold as you want, because 90 degrees is the minimum, but there are multiple places where those arms can bend, so it is hard to tell whether the result will be good for you until you assemble everything and see with your own eyes the result sitting in front of your setup. Another issue is a little tilt - the arm holding my monitor (27") tilts about 1 inch downwards. It is not much and you can compensate tilt by rotating arms, but still it means that something is weak in joints, and I suppose it is plastic insertion which is hollow inside (I would suggest their engineers to make it solid or use another fix if they can do that, but let's leave this to engineers). Who knows how this plastic insertions will look in a few months.Besides that the stand is great - it is good looking, and feels solid, all materials feels good and it does not wobble on my desk. I would be happy with it if it can bend arms as I need. Definitely I would recommend this to buy.

Easy to assemble the design is good, it comes with some wire clips to hide the wires! Great to save spaces on desk, very sturdy and great price for a laptop stand & montior. Very easy to adjust to fit your eye level

This arm was not strong enough to hold my monitor level. Tried adjusting the arm to no avail. Pretty sturdy, clamps onto the desk well, holds the laptop well.

I recently purchased this monitor and laptop mount for my 17-year-old son, and it's been a fantastic addition to his workspace. The universal compatibility fits his setup perfectly, accommodating both his monitor and laptop with ease. The full-motion adjustability allows him to customize the viewing angles to his liking, which has significantly improved his comfort while working and gaming.He particularly loves the ergonomic benefits and how it has optimized his desk space, giving him more room for other essentials. The integrated cable management keeps everything neat and organized, which is a big plus. The installation was straightforward, and the sturdy build assures me of its durability.Overall, this mount has been an excellent investment for his needs, and he couldn’t be happier with it!

Easy to set and use. Although I did need to buy andditonal bracket that was custom for to my HP 24M monitor. Be sure to check for the correct holes so the installation is..much easier and less of a wait. All in all a very sturdy product and was exactly to spec.

Producto resistente, tiene buen soporte y es fácil de instalar.