19mm Latching Push Button Switch with Wire Socket Plug 12V 3/4" Mounting Hole Black-Shell Red Light

Works good. Easy to install. Looks cool. Just watch how many amps are on them.

Great looking switch, although nothing would indicate that this is waterproof. Water resistant, maybe, but we'll see. If you're looking to install this, first, the diagram provided by the manufacturer is exactly right. I tested all 4 wiring configurations and they worked perfectly. My advice is to ignore the wiring guidance provided by other reviews as at least one of them will result in sparks. I'm not sure why manufacturers can't just provide a simpler diagram, but here is my diagram that is hopefully a bit easier to follow. This is how you wire this switch to a light with red and black leads (using their configuration #1): In this configuration, pressing the button turns on the light and the light is only illuminated when in the "on" position. First, cap the brown wire - not needed White wire from the switch goes to the positive battery terminal. Tie black wires from switch and light together and run to the negative battery terminal. Red and white wires from the switch go to the positive lead on your light (device). That's it. Pretty simple. I'm a fan. Definitely a sleek looking switch that's much more refined looking than a toggle switch.

Functions well inside the truck cab and on the truck bed outside the truck. I'm driving in gravel and dirt several miles a day. Purchased 3 years ago and still works perfectly. Swith is bright. Good quality and a good value.

The switch seems to be of decent quality and most appropriate for use in a dry setting. I would not use it outdoors. Switch was easy to install once I figured out the schematics that were included in the package. A number of people have given different advice in their reviews on how to wire the switch, but I found it to only work when I followed the instructions (rather than using the "tips" from some of the other reviews which didn't work for me). I don't yet know how long this switch will last but it's working for now and I'm happy with it. I even bought a second one.

Seems to be a good switch, directions are a little lacks! Wish it was only lit when the button was pushed.

I recently changed the lead acid batteries to LiFePo batteries on my Ryobi ZT480 zero turn mower. So I took this opportunity to replace the key switch as well. I never remove the key, but it has gotten bent over a couple of times and I was worried that it might break off. So I replaced it with this switch. This switch easily handles the 48V switching voltage and I took 12V from the DC-to-DC 48V to 12V converter for the LED light when power was on. The switch illuminates when the power is on. It looks like OEM and works great!

Very nice switched. Comes with plug connector and wire tails. Seen other reviews saying switch it too bright, not true ! Illumination is perfect. Other complaints I read were didn't come with instructions. I'm not and electrical person, and the pictures in the description of this switch is all you need. Seriously only 4 wires to connect, super easy. Says you need a 19mm hole to flush mount, you can use 3/4. Used this switch for led lights we put on the fishing boat. Works fantastic and easy to install.

This on/off switch does exactly what you would expect it to do. I wired this button into my light bar setup on my truck and it resulted in a clean, almost factory look. Excellent quality and a great push button option that doesn’t look or feel cheaply made. Would definitely buy again.