Ghost FIRE Pedal Power Supply with 8 DC Outputs [TRUELY Isolated] for 9V/12V/15V/18V Effect Pedal+5V USB for Phone with Separate Short-Circuit Protection

Plenty of power with no noise. Very solid build quality and performs well with a small footprint. This looks like it’s supposed to compete with Strymon. It sure works well. I have purchased several for different boards. Very versatile for supplying to varied voltage and current needs. The power cable is very robust and grounded! This is a massive bargain for a professional quality power supply.

Works great! Was having a lot of noise when I connected a big sky and EC1 on my board. Now it is perfectly quiet!

Just perfect. I was using a Caline CP-05 and, although good for it purpose, it generated a lot of noise. I changed to this one and it was a HUGE difference. No noise at all!!! It works amazingly well.

Very happy with it so far! I'm building a budget pedal board and this fits the bill perfectly. Another cheap power supply I tried introduced some unfortunate noise, but this is quite quiet. I haven't directly A/B'd it with higher end units, but suspect it will hold it's own. Seems well built, thoughtful design, lots of power for the price. I like the flexibility of outputs 7 & 8. The outputs have enough mAs that you can split them if needed, which you might for bigger boards. But 8 outputs is a lot for anything in this price range. Also like the power brick it comes with--the ones where the brick plugs directly into the socket annoy me.

This thing is great it's pretty small so you can fit it under a small board like mine, I only run 4 pedals and it works just fine. No need to buy from an expensive brand. 🙏🏾

Silent. Good wall adapter.

This cleared up any noise I had with my previous power method. I was using a 1Spot and it was fine for a while but it has been picking up almost all the EMG interference in whatever’s environment I was in. Fans, computer fans, and the typical 60 cycle him from single coils in my strat. This is the cleanest you can get without batteries for this price point. And it has a usb port so it’ll power my iPad for backing tracks or amp sims.

Does exactly what it's designed for. Would be nice if the polarity could be changed on some of the ports but adapters will do the trick as well.

Alimenta todos los pedales incluyendo el HX Stomp

Powers all my pedals with varying degrees of power from 100ma to 500ma.

Fonte fantástica

正方形のフォルムが美しい。 写真の印象より薄く コンパクトである。 僅かにバリがあるため ちょっとの塗装ムラが気になるような 神経質極まる方は、一瞬考えてから 購入されたし。

This is a great compact pedal board supply. Each of the outputs provide 9V at 500ma, with the last two being adjustable via DIP switches on the back of the unit, allowing for 9V, 12V, 15V or 18V, with the current being reduced as the voltage increases. As some pedals may need more juice, the unit also comes with some adapter cables to allow running 2 outputs either in series or parallel, allowing for doubling of the voltage or current. The output voltage is regulated and sits around 9.25V, which is pretty standard. I tested it with a bunch of pedals and didn't have any issues with noise and measurements seem to confirm this but your mileage may vary. Note that the supplied mains power lead appears to be for the Chinese market (being upside down) and lacks the semi-insulated live and neutral pins, so ditch that and use a normal AU approved IEC lead instead with the included 12V power brick. Overall, a great little supply.