BrosTrend AC650 Dual Band Linux WiFi Dongle with Long Range WiFi Antenna

Absolutely great product for Windows 11 and LINUX. The antenna is double normal size and penetrates signal through my three layers of bricks over a twenty foot area. Installation was easy and up and running on both system types after you have entered router passkey. You might have to restart the computer before WIFI is connected . I’ve tried cheaper standard dongles with LINUX and it’s a pain to set them up. Good value for money item, sturdy and comes with installation cd and instructions. but I didn’t need them.

Worked out of the box with Zorin OS Core 18

Having recently switched to Linux I have had lots of problems with Wi-Fi dongles. This one worked straight out of the box on Linux (Zorin 17.2 core). It connected to my phone's Wi-Fi hotspot on 5 gigahertz on channels 36 + 42 ( something none of the other dongles could do). I have an unlimited data plan for £18 a month and I'm getting 100 Mbs + download and 50Mbs+ upload speeds on 4G. So very happy, particularly at the speed and ease with which this product was installed and worked.

I've tried the adapter on a few machines now, it worked on Windows instantly with plug & play. I then tried it on Garuda Linux (Arch) and using the command they provide, the drivers were installed and working in under a minute. I also noticed very little difference in network speeds compared to my ethernet cable. However, the one complaint I do have is that the antenna feels a bit rattle-y and loose, and the biggest problem is the turning angles. Unfortunately, you cannot turn the antenna any way you like which is a bit of a problem depending on how your setup is structured. Finally, I tried this on a Raspberry PI 1B despite the description stating it is only for 2+, when installing drivers it seemed that the progress had stopped indefinitely, however, after communicating with Alkis from tech support, he was very helpful and explained why these lower models are not listed in the description and the reason it seemed stuck. It turned out that the compilation of the driver would take several hours on such low hardware, it ended up taking roughly 5 hours. After installing the drivers however, the WIFI adaptor works completely fine except that it can't be used to its full potential because it is being bottle necked by the RPI's hardware.

Great WiFi Adapter, I was having issues with the on-board WIFI from the RPI4B and bought this and it made the world of difference. Installation was a breeze, plug in the adaptor and run a command line and job done. I never had compatibility issues with using this on bookworm and bulleye (2024-10-22) over all i found this good value and had great software compatibility.

This is a very good device, works well , does everything it says on the box

In the past, I've had problems getting a USB WiFi device working on Linux. This device came as a welcome change. Not wanting to be forced to buy a new machine to run Windows 11 I switched to Linux Mint. Due to past experience, I searched for a USB Adapter that offered Linux drivers, and this device seemed to fit the bill. I installed the Windows driver to try it out and then installed Linux. Before going through the procedure to download and install the drivers, I plugged the device into a USB socket. Linux found it immediately, and a wireless connection was available. It was easier to install on Linux than it was on Windows. I had a problem with the antenna, which I couldn't get to rotate. The reply from the support desk came the next day and encouraged me to use a little more force, and it worked fine.

Having received an installation CD with drivers for the product, I then attempted to install said drivers on my Linux machine. Much to my dismay and disappointment, running the install script popped up a tonne of errors on my terminal. If I had more knowledge in C programming, maybe I could've solved the issue myself but even enlisting the help of someone who know's C didn't help. Eventually, I ended up finding some drivers on a GitHub page, some of which froze my machine, and one that eventually worked... I get that Linux has a small market-share of all PCs in the world but that doesn't mean you should make shiny, excellent, marvellous install wizards for the big two (Mac and Windows) then give Linux half the attention. If you don't have the time/manpower to spare for Linux, then don't support it at all rather than sell us, the buyer, false dreams that your product will work out the box. I hope the makers of this product will see this review and make improvements to the drivers. P.S. Please put the drivers on your website. Upon visiting the site, the drivers for this model WiFi dongle are nowhere to be found

La BrosTrend Linux Chiavetta WiFi USB AC650 è davvero un ottimo dispositivo di rete. La utilizzo su un PC dedicato a Linux e riesce a captare segnali anche piuttosto lontani, con velocità e potenza molto buone. L’installazione su Linux è semplice grazie al comando fornito dai produttori, mentre su Windows tutto avviene automaticamente, senza complicazioni. L'antenna della chiavetta forse è un pò troppo lunga, ma comoda da usare e costruita con materiali di buona qualità. In generale, offre prestazioni affidabili sia per Linux che per Windows, rendendola una scelta consigliata per chi cerca una soluzione versatile e funzionale.

Después de probar otros 2 adaptadores con diferentes inconvenientes con mi Linux Ubuntu, este funcionó a la primer y sin necesidad de configurar nada ( solo la contraseña del wifi obviamente) Muy recomendado

Nice

أول ما وصل المنتج وتثبت تعريفه على نظام لينكس كان نطاق المحول قصير جداً ويتأخر على ما يلتقط الشبكة وكنت أفكر أرجعه بس جربته عدة أيام أخر حتى أصبح نطاق المحول أوسع وأسرع. والآن أنا مسرور لشراء هذا المحول، شكراً.

produit de qualité. fonctionne parfaitement avec LINUX. je recommande