V Bolt for Pole Mounting Sky MK4 Satellite Dish (also used for Triax TD78)

The clamp use might ! solve the issue with sky dish pointing position on wall, allowing dish move up and down for best signal lock (in my case -when growing trees gets on the way !!!) as the original sky dish bracket has no vertical adjustment, unless you drill yet another 4 new bracket holes !! Its important to note, that while its called "V" bolt !!!! the "V" is related to the actual CLAMP TEETH SHAPED ... AND NOT the locking BOLTS !!, the 2 coach Bolts are supplied to fit the dish square holes end on the dish bracket arm. The dish design is easy to fit .. BUT could be improved if the dish bracket ARM has a wider wall end to allow for an additional 2nd clamp for better secure pole lock - wind proof !! , like many other NON sky dish's.

This mounting is for fitting a Sky Mk4 dish bracket to an existing pole. The zinc plating on the mounting is is poor quality and there were some areas that no plating had been applied. But the biggest failure of this item is that the supplied coach bolts have a squared end that is supposed to lock into the square hole on the sky bracket. This enables the bolt to be locked so that the nut end can be tightened. Unfortunately the squared end dimensions of the supplied bolts were smaller than the sky bracket rendering the fixing system useless unless larger bolts can be obtained.

Good Quality

Worked well, was the correct size for the job.Top marks

Does what it is supposed to

I've used this to temporarily install a satellite dish on scaffold while building work is being carried out. It does this very well!

Nothing

They are ok I will use them.