Conductive Cloth Fabric Adhesive Tape 10mm x 20M (0.4in x 65ft), Faraday Tape for EMI Shielding, Interference Signal Blocking, Laptop Mobilephone LCD Repair, Cable Wire Harness Wrapping

Used to make a Faraday can. Much easier than removing old gasket and replacing with expensive gasket. It worked during testing for a gasketed 55 gal drum and a 50 cal ammo box. Great product, but must have a gasket already in place.

Was a quality product as represented. Used as Emp shield gasket for garbage can lid. Put one piece in corner of trash can lid and second piece went over top and lapped corner piece so rim of garbage can can slide over corner piece and not dislodge it. Will tell you how it works after first Emp. LOL’s

This worked so much better than I expected. I used this to get rid of some bad emf pickup on my xlr microphone.

It works, but there's nothing holding this roll together. On one end is the conductive fabric and on the other is removable backing, like you'd get on a band-aid or something, so there's nothing holding this roll of tape in the roll. Immediately after getting it, the whole thing fell apart. Right now I've kind of wadded it up and tied it with a rubber band, but that causes kinks, and it's not very usable or sightly.What it could really use is a spool, like for ribbons.

I didn't need much of this so I wanted to find a small quantity at an affordable price and this fit the bill. I was replacing some LED back-lights of our LCD TV and the conductive tape that was already there lost it's adhesive strength when taking it off. This Gennel brand tape was the perfect replacement.

I had a flashlight that burn out the brass conductor that ran the length of the battery area. I cut the metal out and used the tape in the same area. Works great. A +++

This tape is awesome for what it was designed to do. It's not going to protect your credit cards, or keep the government from reading your mind, or any other tinfoil hat conspiracy stuff.What it will so is shield sensitive components from unwanted electromagnetic interference. I bought it to isolate some 900 mhz UHF RFID antennas for a miniaturized POC project, and it worked perfectly.The adhesive is very aggressive, and the tape is super flexible. I was originally after some conductive fabric, but this fit the bill at a much lower price point, and turned out to be useful outside of my intended project.

This tape works VERY well as a substitute for the copper tape that would normally be used with the Chibitronics "circuit stickers". Appears to have much better conductivity on both sides (especially the adhesive side.) This tape will allow me to reliably and securely connect a "Chibi-Chip" directly to the paper, rather than using the somewhat clunky "Chibi-Clip". Also "folds" to make turns (as does the copper tape.)I am using the 5mm tape for connections to the Chibi-Chip pins, and the 10 mm for a "ground return" back to the Chibi-Chip.For important applications (e.g., work of art, as opposed to quick demo) I will be using this cloth tape instead of copper tape.

Tape worked great. I used it to cut down on humming noise from the power cord on a non-shielded sub woofer.

Just the material i was looking for !