PlayVital Full Set Protective Skin Decal for Steam Deck LCD, Custom Stickers Vinyl Cover for Steam Deck OLED - Messy Code

Really cool set up. Difficult to apply. Blow drier is a must and you must pop out all the holes for the ventilation system. I ordered a plastic hard shell to go over this (not pictured) and it looks sweet.

Unfortunately, the cutouts on these are off. Using things that have precise cutouts, like the buttons, as a guide, no amount of pulling or stretching can fix the horrible gaps around the screen, trackpads, grips, etc. I lost button functionality (was sticking) because, when depressed, the cutout would be slightly in front of the button (I.e., hole is too small) preventing it from fully popping back out.UPDATE- Seller reached out immediately to rectify the problem. I appreciate a seller that stands by their product especially when there is a quality issue.

Good looking - hard to get adhesion / glue to stick on small part.I uses a heat gun to apply sticker - made it mutch easier to apply

When I got this product, I didn't expect the quality that I got. Everybody says that the sticker is thin, and it is, but it's a sturdy and thick thin. The texture is great, and you can stick and unstick the sticker plenty of times before it looses it's stickiness. It's a little difficult to put on, but it's not too difficult, especially if you have somebody helping you.

This product is very easy to install. This vinyl is ok-made and has two layers. It has the design and enamel over the top of it. If you do scratch it, the enamel could potentially come off. Comes with two packs.

Pros: Overall it's a decent skin. The print quality isn't very high resolution, but it looks alright from playing distance. It comes with two full sets of skins which is amazing at this price point! The installation is definitely the high point of this product. The skin is rigid enough to maintain its shape if you have to remove and re-stick any parts and the adhesive isn't so sticky that it prevents adjustment. The skin also dos not cover the rounded corners of the device so no annoying wrinkles to worry about.Cons: it's not sticky enough. While the lack of stickiness allows for an easy installation process, it also causes the areas above and below the screen to peal up. I actually cut off these areas to mitigate this issue but as you can see in my images it has already begun to peal even though I've only had it installed for 2 days. I have serious concerns about the longevity of these skins. This shouldn't be that big of a deal if you have a case though.Conclusion:overall worth the price but wouldn't count on it lasting very long if you're not using a case

Would give 5 stars if it was cut better and was a little more accurate.For the price and comparison to others I think it's a good trade-off. The laser cutting leaves something to be desired. The vinyl is not 100% accurate but very close. They provide two full skins per pack so you can try if you completely fail the first time. The laser cutting missed a spot on both prints I purchased so theres a small jaggy. Sometimes the laser cuts too deep and you have a hard time separating the print from the paper and the paper comes with. Even perfectly aligned in the center of a zone, you'll still have some minor misalignments.The instructions are weak and are for a ps4. This is a much more intricate install. Dbrand has a good install video that will suffice but you take the same approach because dbrand uses 3m paper. You're best to just freehand it. It will not be pixel perfect. Using a hairdryer does help to smooth it out.A word of advice is to carefully pop out all the speaker pips before you remove the vinyl from the paper because its near impossible to remove them later. They should just stick to the paper when you peel but they don't.

Fits great, definitely need to use a blow dryer to shrink wrap after sticking it on though. It feels like car wrap

Peccato sarebbe anche carina ma si stacca in continuazione sui lati 😕

I loved the design of the rusty armour skin, however when I received the item the print was such low image quality it looked awful, sent straight back!

Die Folie im Teardown Design sieht ziemlich ausgewaschen aus. Dadurch entsteht keine gute Optik. Darüberhinaus hält sie bei mir bis jetzt ganz gut und ließ sich mit Hilfe des auf YouTube vorhandenen Installationsvideos und ein bisschen Fingerspitzengefühl gut aufbringen. Aber hätte ich die Optik vorher gesehen, hätte ich mich für ein anderes Design entschieden.

Took a bit of gamble on this, I thought, based on some of the reviews and ordered the 'Tear Down' set. I've only tried one set of skins before from a company that only sells through their own website in the UK and is 3 times the price. The application in that case was a disaster and I never ended up using.I only used the front section of this (around button and sticks) as I use a case. The 'kit' is fairly minimal (X2 of the vinyls and some wipes, no instructions). That said, the vinyl is decent - accurately cut, colours are all there, image is not blurry or low-res and a nice matte finish.It went on ok, the vinyl didn't really stretch despite repositioning a couple of times and a blast from the hair-dryer sealed the deal.For just the front, I don't think I could have done any better for the money.

I was expecting a semi-good cut for this price point especially since you get 2 sets of skins. While the overall quality and cut of the skins were above expectation, I definitely cannot recommend this product as it is unuseable, even after proper Installation. The edges are curling up even after proper installation and heating molding with heat gun. As seen on the picture the edge curling was already present even before installation. Annying lifting edges which make for sharp edges when holding. Had to remove