Dreamtop 9 Pcs Guitar Radius Gauge Under string Radius Gauge String Gauges Luthier Tools for Guitar Fretboard Radius Gauge

Work very good. Stamped metal with sharp edges. I am sanding the edges with 600 grit. These do work and for the price it's a good buy.

There good tools easy to use feel ok quality is good

Probably fine for 6 string guitars both too short for bass that I can tell you so you dont have to guess like I did.

These are very lightweight, stamped. You may need to deburr, I will sand the edges a bit. Such a low price that I don't mind. Prompt shipping.

These do work, and they are cut to the correct radius of each of the gauges, I checked them against a different set to verify. They do indeed work, depending on how you intend to use them. My use, understring at the saddles to verify proper radius while doing a setup. For my intent, they only sort of work. The "T" section of the gauges are much wider than they should be. They worked okay, for my Les Paul with a tune-o-matic, since the bridge sits up higher off the body. On any of my other guitars they were just to wide. On my tele, they would hit the bridge plate so I couldn't use them. On my Ibanez and Charvel, they would hit the body. Thankfully I tested them lightly or I would have big scratches in my guitars. Also, they are a little sharp, not as sharp as some, but I would recommend some sandpaper around the edges just to remove the sharpness.

Do your own setups! These radius gauges are just what you need to set your saddle heights. The thin nature of these gauges make it so you can either slip them under the strings and raise the saddles, or set them above the strings and lower the saddles. Stop paying luthiers to do a job you can easily do yourself.

The gauges were easy to use (my first time using a radius gauge). Easy to see the radius of the neck using the bottom of the gauge and finding the best fit. Easy to adjust the bridge by seeing the 2 E strings and then adjusting the others.

Seems these are pretty accurate. Super sharp edges though--I cut the HECK out of a finger. But a quick light filing to burnish or chamfer the edges followed-up with a going over with some 000 Steel Wool took care of that problem easily. The markings are etched so don't worry about taking them off. Other than the edges being sharp these gauges are really good quality. They all seem to be very accurate from what I can tell. They're not Stew Mack but they also don't cost nearly 40 bucks! Good purchase!

Semplici da usare...basta fare un giro su YouTube e ci sono tanti video che spiegano come poter utilizzare questi attrezzi per il fai da te liuteristico in casa..grazie a questi calibri si riesce facilmente a regolare senza difficoltà l'altezza delle corde sulla chitarra elettrica in base alla curvatura del proprio manico (basta vedere nelle caratteristiche del prodotto che si possiede)...Non può mancare a chi serve avere chitarre intonate ed efficienti

No sharp edges works as discribed

They do the job but the edges have not been finished properly are very sharp. Not much fun to use if you are concerned about scratching the finish on an instrument.

Very easy to use for setting correct action on guitar saddles and to find out the gauge of the guitar neck,would recommend this product and seller Thankyou

El articulo cumple las expectativas que se anuncian