Spiral Cable Wrap - 20 Ft 1/2" Spiral Wire Wrap Cord Covers Bundle Sleeve Hose for Computer Electrical Wire Organizer (1/2 Inch-20Ft)

I had 2 small cables to wrap and the 5/16 worked great. I had read about it being a little tricky to wrap and to do small sections but I ended up stringing the 2 wires between 2 points so it was elevated at my chair height and then coiled the spiral wrap into a small coil with about 24 inches at a time not in the coil. Held it with a zip tie. Cut the tie and let out 24 more inches as needed and used a new tie each time. Made it a simple process. Each wrap, I passed the coil over the wires and worked by way down the 2 cables. I was able to do 50' of cabling (2 - 33' spiral wraps) in relatively short time with no issues and not necessary to cut the spiral wrap. Just the patience to pass the coil of unused wrap over my cables with each wrap.I'd buy this product again next time I need to wrap some cables.

Perfect item for organizing your wires on any setup. Whether it be your work from home or gaming setup. Bought this to reduce the wire clutter on my setup and it works perfectly 👌. Long length and you can cut to the amount you need.

I got 2 of these to cleanup the cabling for my KVM switch. I have 3 PCs on the KVM. each has an HDMI, a DP & a USB 3 cable. with this stuff I was able to clean up the cabling so that I have one 6' bundle, and a second bundle that breaks out a set of connectors at 6' then the second set about 3' after that.Putting it on was a bit difficult at first. you need to wind this stuff around the cables you are bundling and it tends to get twisted around the cables and it need to be straightened out periodically. I wound up putting most of it in a gallon ziplock bag that you can then twirl around the cable bundle. This made it significantly easier to install. there are also a few things to consider while your wrapping a bundle of cables.1) make sure the ends are properly aligned on the end you start with (which should be the end where alignment matters most). once you have the bundle wrapped, i couldn't make any adjustments.2) Make sure your cables are the right length. one of my DP cables was 6" longer that the USB & HDMI. this made it difficult to connect to the docking station it was running to.3) I found it was easiest to wrap the cable loosely, then go back & clean up the spacing between wraps.Overall I'm very pleased with the way it turned out. the resulting bundle is a bit stiff, but there's significantly less of a rats nest behind my desk thanks to this stuff.

This cable wrap is a great solution for organizing wires, but I found it a bit challenging to use for covering all my cables under my desk. With five Cat5 cables to manage, the wrapping process took longer than expected, especially due to its length. Ultimately, I decided to cut the wrap into smaller sections, which made the process much easier and more manageable. A useful tool, but be prepared to customize it to suit your setup!

I bought this plastic cable wrap to protect the rubber on my Tesla charger cord, which tends to get scuffed up when dragging across the ground. It works exactly as I hoped—sturdy, easy to wrap, and it stays coiled without unraveling. The material feels durable and adds a nice layer of protection. Overall, a simple but effective solution that does the job well. Definitely recommend if you want to keep your charging cable in good shape.

I use this around C-PAP tubing to protect it from kitty nails & teeth

Does the job well

god stuff as described good price