Kriogor 12V Car Fuse Box with Relay, 12V Motorcycle Fuse Relay Box Quick Wiring 4-Way Fuse Holder with Indicator Lights & 2/3/5A Fuse for Motorcycle,Cars,Headlights,Navigation,Phone Holder,Car Charger

Was going to make one of these myself with a 12v relay after discovering the price of a healtech device before I discovered someone actually beat me to it albeit lacking some of the intelligence of battery monitoring if you wanted it to stay on after turning the bike off!The unit itself is quite small and fits in the palm of you hand - but I did underestimate how small it needed to be to fit under a 2017 cbr600rr when the under seat exhaust takes most of the space!!! Ideally it could have done with being 10mm shallower but I don't think that is possible with the terminals they used.So after a good hour stripping the fairings away (there wasn't a suitable spot in care you're wondering, so if i can same someone time not doing this happy days!) and shuffling the wiring loom around it managed to fit under the seat as it needs to be somewhere fully waterproof since it certainly isn't IP68 rated.Wiring is simple - please ignore people who moan about instructions and the "acc" this simply means ignition live I.e. power only when you turn the key to the on position - for this I used the headlight fuse and tapped into it underneath the fuse box with one of the scotch clips supplied - this energises the relay and closes the contract turning on the box while taking direct power from the battery and saves you potentially frying a system if you did decide to tap into another source withoutan additional inline fuse.Amazing that each port is individually fused so you can customise the wiring protection depending on what you're connecting and up to a total of 20amps across all 4 ports! Certainly enough for heated grips, phone charger and whatever else you wish to connect just maybe not the kettle or toaster.Overall very simple, very effective, as long as you have space under the seat or somewhere fully waterproof this is the safest way to connect accessories and gives some piece of mind you won't blow a fuse for a critical system on your bike!If you're considering this for a dash cam this will work but it will shut down as soon as you turn the ignition off as it doesn't monitor the battery voltage if you wanted to use it for parking mode.For £15 the build quality and features are outstanding and you certainly couldn't make one of these yourself any cheaper so value for money is definitely 10/10!

I've recently added a few aftermarket electronic items to my motorcycle. Routing them via this separately fused and powered 'fuse box' allows total peace of mind, as there is no risk of draining the battery or fusing the main components within the motorcycles electrical system. It was easy to install and add components to. Well made and a quarter of the price of similar products.

This item is as good as others costing several times more . Very easy to fit provided you remember that the third wire is intended to connect into an ignition switched fuse in the bike's fuse board so this powers the unit on when you turn on the ignition .The top of the box removes which makes it easy to connect any devices to it .I wired it into the 'frunk' on my Honda NC750 x and have added Tom Tom and a USB port and later will add Heated Grips and additional riding lights .

Easy enough to install, feels solid and PCB is well constructed. Only issue iv had were the supplied fuse (all 4 preinstalled) fell apart when I removed them

The product works great. It has 3 wires a red (+) wire, black (-) wire, 3rd wire goes to the rear lights that tells the device when to power up. It took some working out,where to wire it on my RE Himalayan as there is very little cover on it, ended up fitting it to under the documents holder under the saddle. It does make wiring other devices onto motorbike much easier as u just need to screw the plus (+), negative (-) wires into the device. As it can support 4 devices with upto 5 amps per device. So now my hot grips only work when my bike has it's power switched on.

Do better! Your box, instructions and diagrams do nothing to explain the purpose of the acc cable. If indeed it is a relay for connecting to a switched live then say that. no videos, no instructions online, luckily I came back and found the answer from previous purchasers in the same predicament which saves me concocting some test rig to try it out.

Fast delivery well pleased with item fits the bill recommend

Bought this to replace the bigger version I already had on my motorbike really easy to install gives a nice clean look

Très bien, dommage des étiquettes en anglais.

ottimo