Compatible for OnePlus 11/10 Pro Screen Protector, [Auto-Dispersion Tech] Full Coverage Hide Scratches Fingerprint Support Bubble-Free Tempered Glass for OnePlus 11/10 Pro - 3 Pack

I've sat on this purchase for almost a year because I was worried about messing up and gluing it wrong. I shouldn't have. It's easy to install and very forgiving. It seems like the glue won't be too hard to remove if I crack it and need to use one of the other included protectors. With the opo case, I can't feel the edges of the protector, and I didn't even have to redo my fingerprints. Can't even really tell that it's in there unless I look for it in just the right lighting.

I bought my OnePlus 11 5g and wanted to ensure the screen was protected as most of us do with any phone. I'd done the flimsy vinyl screen protector through the life of my Oneplus 9 but desperately wanted to glass feel and protection the vinyl ones can't give. Unfortunately, most glasz protectors for my 9 popped off because of the edge curve and my phone case so I was worried that would be the case with any glass protectors for my 11. After looking through a ton of reviews I decided to try this kit out.100% watch the video. Even if you are a seasoned screen protector placer like me. The first screen protector I messed up because I didn't take my time or watch the video. I had bubbled and it didn't adhere properly and the liquid got everywhere. Did with with the video and I had no problems at all. I do suggest having extra lens or alcohol wipes handy, as the liquid does tend to ooze as you adjust the screen. I noted that from a previous reply that said when they didn't clean the edges before curing it had their buttons stick/dirty. Cleaning the edges wasn't hard and I had no button sticking. Make sure you remove and throw away the foam bumpers after you are done curing or they are a pain to remove for the next install.The glass lasted several months with numerous falls and things clashing against my phone. No scratches, no breaks. On Friday, I was trying to get items into my trunk and unfortunately my gloves did not allow for me to grip my phone properly so it slipped out of my hands and cracked on the edges of the glass. Nothing happened to my phone's original glass, just the screen protector. I was so relieved and happy 😭I was surprised how easy it was to peel the broken protector off. It didn't crack much further from what it had when I initially crack the protector, which you can see in the photo.I don't have issues with my fingerprint reader, response rate, or anything. I wish you could buy "refills" vs the whole light kit again!

Edit 8/2The third screen protector has developed a crack as well. I've never had a tempered glass screen protector for any other phone fail like this.Edit 6/6The screen protector has developed a crack across its entire width about an inch from the top of my phone. Nothing has happened to the phone to trigger the crack, it just appeared. I don't know if I'll bother to install the last protector or move on to another brand.Original review 5/31The install went well enough. I was disappointed the red cap on the bottle didn't twist off to release the glue as I expected. I ended up stirring up enough air removing it and twisting the tab inside that I got dust under the glue. Cleaned everything up and the second attempt went well. I may not quite have cleaned up all the glue from the first tube, though, because my phone got cured to the installation frame. I had to use a lot more force than I would have liked to break it free.But, the phone still works, the fingerprint scanner works, charging works, the buttons and speakers work. Everything works, and now my screen is protected.

Updating this two days after writing my original review. These protectors are junk. I carry my phone in my pocket. It sits in a pop socket holder in the car and on my desk at work. Noticed today that, all of a sudden, one of the corners cracked and was lifting off. The phone has never hit the ground or was dropped. The only thing I can see is it is rubbing against my case. If that's all it takes to crack on of these screen protectors, I'd hate to see them if the actually do get dropped!Ordering a different brand right now.----------------------------------------I've used similar products on other phones in the past. I like the idea of having a support and guide for putting the protectors on. For this product, the support frame worked fairly well, with one problem. While the frame does position the screen protector well for installation, it only does so on three sides. The bottom of the phone has the slide out piece to slowly drop the protector on the phone. However, one that is removed, there is nothing on the bottom to keep the protector in place while it cures with the IR light. What will happen, if your table happens to be the slightest bit unlevel, is the protector can slide of the edge of the screen on that side. That is exactly what happened to me the first time I put the protector on. Since you have the IR light sitting over the screen, you cannot really see if the protector has moved at all. I ended up with about an 1/8" slid off the bottom of the screen.The only thing you can do at that point is to peel the protector off the screen. This must be done VERY SLOWLY. Your fingers will end up with glue all over them. The phone will end up with glue all over the edges and screen. And if you are lucky, the protector won't break into pieces. I highly recommend having a bottle of isopropyl alcohol and cloths handy to clean up the mess.My second attempt went better. Once the protector dropped to the screen, I used the tip of my finger, wearing a latex glove, to very gently hold the protector in place while it cured under the UV lamp. The protector ended up in the right place and had no imperfections in the seal.There were, however, a few issues. First, there was a decent amount of glue that seeped from the edges of the protector. It can be seen along the edge of the phone. I recommend using the alcohol to clean that up as soon as possible after the protector cures.The second issue is the relearning of the fingerprints is a lengthy process. These protectors do interfere with the detection and you will experience your phone telling you to clean your fingers and/or the screen several times. It took me at least four times longer to register three fingerprints than it did with just the stock screen.And lastly, these protectors are fingerprint magnets! They have little, if no, resistance to fingerprints on the glass. Wiping them off with anything other than a microfiber cloth is an exercise in frustration as the prints just smudge across the glass.For the money, I cannot recommend this product. You would be better off getting some good quality TPU protectors that use a decent guide for installation. You may need to change them more often, but you won't end up with glue soaked fingers when the installation fails.

I used all 3 screen protectors just trying to install one that wouldn't make any bubbles or have glue coverage issue. It's impossible to get right, don't buy it. At this price, this is outrageous.Will ask for my money back.

Muy fácil la instalación ya que viene con un vídeo que te explica cómo hacerlo.

Having used a number of different screen protectors I have found this to be one of the best, not quick but a lot easier than you think just watch the video use quite big drops of glue didn't even have to redo my fingerprint, top quality product happy to recommend.

Habe das Produkt Mal ausprobiert, habe schon lange ein Schutzglas für das Oneplus 10Pro gesucht, andere haben nie gepasst, deswegen hatte ich lange nur Folien(warena ich nie richtig gut)Dieses Glas passt super auf das Display, die Rundungen passen auch. Mit hülle merkt man auch keine Kanten am Glas.Montage mit Video Anleitung super einfach, nur etwas längere Beleuchtungszeit notwendig.Alles in allem bis jetzt super auch der Fingerscanner geht 1a

O único vidro temperado curvo que já encontrei até hoje a funcionar perfeitamente no Oneplus 11, já testei praticamente todas as opções no mercado, e este produto foi uma boa surpresa