2 Ton Dual Gear Power Puller, 2 Hook Steel Cable Dual Gear Power Ratchet Come Along Puller Tool with Cable Automotive Hoist Hand Winch Cable Puller Stretcher Lift 4400 Lbs

Works great. Fast delivery. Reasonably priced.

I was excited to have bought this for emergency purposes. My excited took a 180° turn after unboxing and ended up cutting my finger on the sharp handle edges. The sharp edge never got deburred. I started inspecting the rest of it and realized, the gear tooth engagement forks don't line up. This is dangerous if under load because only one side would bear all the load and slip. Definitely missed quality control on the one. Going to return it for an exchange and see if it's any better. Will update. Update.. Decided to return it.

Working like a champ

I needed a winch/ puller to last bit of force to pull out a tree stump I dug up already . Most roots were cut . I used one 4400 lbs rope and one 11000 lbs for the Anker side to protect the 11000 lbs winch . Ratcheting the tension up was good , but as soon as the force starts building up it appears the ratcheting gears get out of alignment and the stop mechanism does not lock it. You ratchet and then you press the stop or blocker in by hand . Also with some teeth of the gear it does not engage at all. So you have to find the right spot , push the lock in by hand etc. on the pics you see that gears are bend within, they are just punched and the ratcheting mechanism only engages barely on one side . For one job it works and it is cheap, but if you want to utilize full 5 tons , I am concerned about the design, strength and blocking / stopping of the gears. I hope you can see it on the pics , but it got the job done and is pretty cheap … but will not buy again and return for a hopefully better manufactured one

Not the highest quality, if used lightly probably will work but if you need it for safety or heavy duty look elsewhere. The picture shows the terrible alignment between the drum gears and the lever engagement paw.

I described it earlier. I don’t know why they’re asking me for another review, but the product appeared to be a repaired item and not repaired very well. The frame is crooked the bolts if they’re tightened, don’t allow the inside pieces to move. I realize your aircraft nuts on there, but The bolts are smaller than the holes in which they put through, causing them to shift positions and cause a bind on the ratchet, Pawl

This item was very high quality,it works well under a load, I would highly recommend this come along puller to anyone, I have family members that are going to buy them one, thanks for making high quality tools for the world to use,Thanks again!

This is not a great tool. The wire cable constantly gets stuck behind the clip that is suppose to contain wire from unraveling outside rachett.. the wire gets out and then binds the rachett so it doesnt work...it is pinched I have had to take it apart three(3) times to unstick wire (thats not counting the times i could unstick it by prying cable with screw driver... Not the greatest ... i have used it for just one project. . I wouldnt count on this in a pinch