Art3d 3D Fluted Textured Slat Wall Panels, 19.7 x 19.7 in, 12-Pack, Black

WAbsolutely workable as ceiling tiles with one hack/fix...silicon/glue 24" thin trim across middle. It works.

Love how these turned out. Originally I wanted full panels as I didn't like the spacing every square with these, then I saw pictures in the reviews of someone alternating the direction of each square, and loved that idea. I will say they are not easy to cut, but easy to drill/poke holes in. I have part of my wall left to do since we need a mini table saw to cut them. They're too fragile for a regular saw, but too thick to cleanly cut without a saw. If it's something that can have a messy cut, like an outlet hole thay will get covered up, it's doable, but otherwise you need something else. Either way I wouldn't change it since they're really the perfect thickness to be light enough for mounting tape, and thick enough to look good. I did my entry way wall in a couple of hours independently, and for $180 it looks great (and we have some panels left over for somewhere else).

I purchased 4 sets of panels for our office space at our WeWork building. Because it is a temporary space, we can't make marks in walls and our specific office has a cinderblock wall and concrete. It was hideous and everyone thought we were in a dungeon or basement for zoom calls. First I tried the application with the Elmer's putty which was great for a while, bit I didn't clean off the cinderblocks before and there was a lot of dust and I think that.is why they fell down. So, after that, I went ahead and got a hot glue gun and used it and it was amazing. A few burned fingers and a headache and voila! It totally transformed the space and it looks so much better. I think they should pay us because it was terrible before. There are two cool things that happenrd that i want to share, specifically. 1) I cut very small cuts at the bottom and top of a few of the pieces and I was able to enclose the ethernet cable, hdmi and the TV power cord through the raised portions of the panels. Super cool, unintended thing there. 2) we had this polished concrete wall with a curve in the right side of the room and I never thought about applying the panels around a curve and it looks soppy great in person. A few pointers: - this can be cut but get some serious scissors bc using regular crafting scissors took forever. - the hot glue will cause it to bubble if you get too much on it, too thick so just be careful bc the heat causes it to melt. - go ahead and get the big hot glue gun and large gluesticks. You'll be glad you did. I used an entire bag of large gluesticks, 8 CT, on this project. -as far as estimating, the images were 4 boxes, but I had some overlapping when I did the curves and there is a bit of a learning curve on cutting in. Overall, this is a fantastic project and i had a lot of fun and it totally transformed our space. 5 stars!!

the first review question is asking is how they adhere. First they don't come pre impregnanted with adhesive material so adhesion is irrelevant and I gave 1 star because I cannot give 0 stars. Easy install yes its easy I used 100% silicone clear. I went every other rib on the back side and it worked when I pressed it against the wall I help then agains the wall for a few making sure the the silicone compressed and pulled it against the wall. My only gripe is the eyes of the panels are not made to but up with each other they are meat to slight overalap I think. in any case that's what gave me a decently uniform look. As my walls are not perfectly flat as many walls are not th edges in some cases needed more glue to adhere correctly I only glued the back side noting on th exterior font side. Light weight - yes the panels are light weight. I had to trip a couple triceps for the light switch fixture and the to needing a full sheet to complete my run. I used a oscillation tool to do so.

I absolutely love these wall panels! They completely elevated my space and made it look so much more finished and high-end. They stick really well—I used AMYFAY Double Sided Nano Tape Heavy Duty (also from Amazon), and it worked perfectly. The panels were also super easy to cut with just a regular knife, which was great since I had to trim them to fit my wall shape. I was a little worried that using multiple panels might not look seamless, but they actually look amazing together. I only needed one box for my project and even had some panels left over. Overall, I’m very happy with this purchase and would definitely recommend them!

So, I bought several packs of these thinking I could make a nice entry way to my basement home theater. I thought they'd be an easy and neat way to create an interesting vibe as you went downstairs. I was sorely mistaken and this is my warning to others. So, these are very thin. I had trouble getting them straight and cutting them as a massive struggle. I had to buy double sided tape on the side and when it was all said and done...it was falling of the wall. It didn't look good. I thought about trying to cover it with some self adhesive wallpaper and even that was just going to be a pit of it's own. So I ended up removing them. Of course, half the wall got ripped off by the double sided tape. So, a lot of time, effort, wall spackle, paint, and money later, and the wall is back to normal...and I am still without my cool entry way. So, this was a few hundred bucks just flushed down the toilet. So, make sure you really think about this before getting into this project. There's a reason you're looking at this and not just buying paint like I should have done.

Love these gave it a 3 star cuz I order two time and they both was different

These Art3d panels were the perfect solution to resolving a space problem. Having moved into a smaller rental home, was confronted with the issue of trying to get all the furniture into a smaller space while having it look right. The issue was a feature wall in the living room that housed a fireplace and cutout for use with a TV. I had no plans to ever use the fireplace, and our TV is way too big to place in the cutout, so coming up with a solution to conceal the fireplace which would result in regaining much need wall space was in order. These panels were it. Using the panels, the coordinating trim molding and double-sided adhesive, they made it look less like I'm hiding a fireplace and more like it is simply an architectural feature in the room. Far better concealing the fireplace with these panels than merely living with a couch shoved up against it. The panels did come packed so as not to have damage to the corners that earlier reviews had mentioned. All of the panels had to be cut, especially going around the mantel. I found it very easy cutting the panels using a box cutter. Trying to use a utility knife would be too much effort. They are light weight enough so that they are easily supported on the wall using their double-side tape, which is removable without wall damage. In all a very versatile product when a little creativity is called for.

Schnelle Aufwertung für jeden Raum! Die Panels sehen richtig edel aus und geben dem Raum sofort eine moderne Atmosphäre. Sehr leicht zu montieren, am besten mit doppelseitigem Montageband oder Kleber. Die Verarbeitung ist hochwertig, keine scharfen Kanten. Perfekt für Setup-Hintergründe oder stylische Akzentwände.

Pena ser de plástico mas ok ficou bonito

Beau panneau pvc , attention coller avec colle contact c’est beaucoup mieux car moins d’épaisseur donc moins de bosse , sinon jolie produit

Je l’avais pris pour un projet de plafond, mais je ne l’ai pas encore posé. Par contre, sur le produit en lui-même, rien à redire : c’est exactement ce qui est annoncé. Les panneaux sont souples (ne pas s’attendre à du rigide), le rendu est joli, la texture est bien faite et ça laisse pas mal de possibilités pour la pose et la découpe. Vraiment un bon produit, fidèle aux attentes. ✅ Aspect texturé 3D réussi et moderne ✅ Souple, donc facile à découper et à manipuler ✅ Conforme à la description et aux dimensions annoncées ✅ Peut convenir pour murs, plafonds ou déco créative ❌ Par contre, il ne se pose pas tout seul… faut encore monter l’escabeau 😅

Debes tener conocimientos para que puedas usar los productos adecuados para la instalación