BGS 115 | Special Bit Ratchet | extra thin | 6.3 mm (1/4") Drive | incl. 4 special bits

VERY effective in narrow spaces - the ratchet is a godsend! It's been way more useful than I expected already and saved mountains of work taking stuff apart because this tool allowed me to access an otherwise inaccessible screw. I only got the pack for one job, too.Some have noted that it's hard to get enough pressure, which is true to a point, but if the space is narrow I've been able to get a lever in to apply pressure and it's worked very well. Rust or thread corrosion would pose problems sooner than with an easily accessible screw though, but I think that's expected with any right-angled screwdriver TBH. The only downside is that you need to take care not to lose the bits - they are really small!Well made and well worth adding to any DIYers toolbox!

Needed for tight access did the job

I have used many offset screwdrivers of the years and this one seemed to get over most of the issues I have found with others. I liked this was a rachet offset screwdriver, so you could put the screwdriver head into a more useful position than the fixed position most have. Also the screwdriver head is very short which is useful when getting into awkward places. This however why it lost a star, trying to fit the small screwdriver heads it's awkward with big hands, also even though the small heads are nice a range of lengths would be nice as I found it too short in one place.

I needed a super slim screwdriver to be able to tighten the screws on my handles on my integrated appliance fascia doors. The screws for this are unable to be tightened with a standard screwdriver. ( see attached picture).A slight loosening of the screws holding the door panel to the appliance enable the ratchet and screwdriver head to be inserted and it was a simple job to tighten.This super slim ratchet did the job perfectly and is so well made and engineered.Saved me having to remove dozens of screws/ bolts and remove both doors to access the screws to tighten the handles.Many thanks to the designers of this. So simple and excellent quality !

Used to replace tiny part in van engine heating system

Well made but hard to use because of its design: the flat shape makes it hard to fit it through tight spaces, as you cannot tilt it getting in and out. Also, almost impossible to apply any pressure don the screw.

Bought for my son. He was pleased with the tool

In confined spaces needs a bit of practice to locate scree. Also needed to be kept pressed on to the pilot screw while adjusting. This was done using thin flat piece of wood levered off the starter motor.It worked fine and bike is running a lot better.