Thermal GrizzlyKryoSheet (38x38x0.2mm) – Ultra High Thermal Conductivity Graphene Thermal Pad – Perfect Alternative for Thermal Paste on CPU/GPU/PS4/PS5/Xbox – Made in Sweden

Any reviews complaining about how fragile and easily damaged these pads are from clumsy impatient people who can not be bother to slow down and take their time in order to use it properly. I had no issues handling and applying this pad with no damage and used the method of using the absolute teeniest tiniest little dot of thermal paste on each corner with a light tap in order to keep the pad in place while delicately lowering and screwing down a massive cpu air cooler with zero issue. Take your time, take it slow, and do it right the first.As for performance and ease of use. i can safetly say i will never use thermal paste again as long as i can get these as it surprisingly dropped all of my temps and average temps on a 5950x by around 5c. Not much change on the minimum temps but i am very happy to not have this cpu spike as much into the red and happily remain in the mid 70 to low 80's under heavy load with the benefit of not having a massive mess of paste to clean just to repaste it again if anything is wrong and risk damaging the cpu pins or socket since certain paste's love to act like glue even when the cpu is hot and refuse to let the cpu go which results in you ripping the cpu out of the socket because the paste fused it to the cooler which is just another step to worry about trying to pull them apart without any damage. This pad is a absolute life saver for cleanup as well as reducing temps, even if the temp reduction is not by very much if any for the benefit of not having to use paste or dismantle your system again for quite some time. The instructions also recommend that you really should replace it after use rather than reuse it due to damage from the first initial install and i dont mind that since i will rarely be taking my systems apart, and if i do then i will gladly buy another pad or two when the time comes for me to take it apart, rather than risk any issue.Yes they are pricey but in my opinion they are extremely worth it for those who will rarely remove their cpu cooler for long periods of time and want a simple no mess solution that matches or even outperforms paste (in my case) if your lucky, etc. Highly recommended!

Expensive... For real))But you will have ability not to clean your cpu every time you unscrew cpu fan)) easy and simple installation. Easy to break but if you will be careful - you won't have problems.Cooling... Same as cheap Chinese thermal paste (PYY, as I remember) and expensive MX-6, little bit disappointed. Ryzen 5 7600X max temperature 95C now, first couple days it was 85C. Quite high, but maybe my pc case is not the best for air flow...So, it works, as one of the best thermal paste, but without dancing around your cpu.First package came not opened BUT without pad! I was shocked... Thanks to Amazon, they sent another package

I have a 9800X3D and the KyroSheet works wonderfully cooling it. I switched from Thermal Grizzly Duronaut and I did not see any change in temperature. The thing I like most about this product is that I tear down and try new things with my PC and being able to reuse the KryoSheet is a big plus especially since I haven't noticed a trade off with temperatures. I would highly recommend this product, it is easy to apply, reusable with no clean-up, and has great temperature performance.

I had the issue of some reference 7900 XTX having high junction temps. I did not take ss of before and after temp, really wish I did now. Playing Darktide used to peg the fans to 98-100% and the junction temp would stay at 108-110C. Replacing the thermal paste with this pad completely solved the problem. It doesn't go passed 90C now. A 20C difference... that is insane. Not only that but the fans no longer stay pegged at 98-100% they run at like max 70-80% now. It's perfect for fixing the hotspot issue with the reference 7900 XTX.If you have a 7900 XTX this works perfectly and the 29 x 25 sheet fits the DIE perfectly. I did not have a problem with putting it on the DIE I simply let it slide off the plastic sheet it comes with onto the die and nudged it as needed with my tweezers. Picking it up with tweezers is no issue either, it is fragile by nature as it has to be to work properly so any unnecessary drag on it while pulling will tear it. Honestly though it is so easy to lay down idk how people are managing to tear this thing....I could maybe see it for a CPU but it's perfect for GPUs and the best part is you never have to worry about repasting. I did end up laying the pad on the cooler itself and then setting the PCB down onto the cooler. Because of how the GPU is taken apart this was the best way. Just cover the raw copper plate with the pad and carefully set down the PCB into position. It is important the pad does not move, both for cooling reasons but also because the pad is conductive, so you don't want it touching the the area around the DIE but only the DIE iteself. It worked first try for me without issue, if you try to leave it on the DIE and then do this it's basically impossible since you have to flip the card over to screw the bracket into place for the PCB and all the other screws. That is why I ended up placing the pad on the cooler and then setting the PCB down on top of it. The plate and DIE obviously line up perfectly so it's no different than placing it on the DIE and then putting the cooler on top of it.TLDR; Had 7900 XTX reference 100C junction issue, pad dropped it 20-30C and the fans run at like 50-80% now under heavy load, not 98-100%