SINCODA USB 3.0 Mount Cable-6 (Round Single USB3.0)

This worked great with my Kenwood double din receiver that only has USB on the back.. i was able to remove the cigarette lighter port from my Tahoe center console and with a little widening of the hole, just run the wires through and secure it. Works great! 👌🏻

Works Great. I removed my dash bezel and removed the cigarette lighter and put this in place of it, It was a direct fit! I have 2 cigarette lighters in the bezel, so it was an easy choice to replace one of them, then I ran the USB to the back of my KW headunit, Android auto and apple play work seamlessly. DO NOT over tighten the nut on the back, or you will strip it out. I would recommend this purchase!

This panel mount extension port works great and connected to my new receiver without trouble. Using it for Apple Car Play in the car. Syncs without trouble. Audio AUX port is full stereo. Cable is plenty long enough for the port to be mounted in the center console if you wish. Only thing keeping it from a full 5 stars is the mounting bracket that was supplied, The port doesn't fit properly in it. The inner threaded body is way to small and floats around, the larger flange body is big and doesn't fit the round opening. Had to 3D print my own custom mounting bracket that is shown in the picture. The round hole is about 1.175" in diameter the flange part of the port fits snug. All in all its a nice port and works well. I would buy again and would recommend it.

Used this on an install of an Alpine media head in my daughter’s 2010 Toyota Prius for CarPlay connectivity. This extender/port worked perfectly with no issues but it was smaller than the blank already on the car IP. Had to cut a hole below the blank but that wasn’t a big deal. On of the retaining wings did break when I locked it in place but the other 3 were fine so not a big issue.

Out of the box ready to use. Fits in the cigarette holder of my Jeep with little modification to the Jeep panel itself. Purchased for my double din radio install. Looks almost factory. Highly recommend.

Bought this to put a USB port for charging and using Apple CarPlay in my Honda Element (which doesn’t have a native USB port) for a new stereo system I installed. Works perfectly for my needs

Very snug fit on sides. Leaves a small gap on top or bottom. Not sending it back but that gap is too much to deal with. I can use it for different product.

Works great! as advertised. easy to install if you have the correct hole saw or an OEM opening that fits

Installed an Android Auto/Carplay head unit in my Chevy traverse. I used the installation adapter to integrate the factory usb. AA would connect and drop intermittently. This product fit in the factory location with little cutting and provided a direct connection to the head unit. Now it works all time, regardless of which cable you use.

This is great and perfect for what I needed. I have a pioneer double din car deck and when i hooked up my phone to my deck, to use the GPS feature, a connection error would always appear after a few mins of use. I had a usb hub that had a circuit board for my connection, in my Hyundai Sonata, which I believe was interfering with the connection.I decided to change my circuit usb hub to this usb adapter and installed it from my dashboard to the car deck usb input jack.The problem I had was instantly fixed. Great product. I highly recommend to anyone. This was a very easy install.

Solid product, well built, quality cabling and hardware for pretty much any kind of installation situation. Put mine in an arcade cabinet and worked like a charm.Came fast, well packaged and in perfect condition.If you're reading reviews to decide whether to buy it, you can stop. Just buy it.

Using this in my car - installed it when i got my new in dash stereo system, it has been added in to the dash and look awesome, well made product and no issues with comms with stereo unit.

Easy to install, provides a clean look