Limino Epoxy Resin - 100oz / 2.6L Crystal Clear Epoxy Resin Kit Casting and Coating, Table Tops - Bubble Free Fast Curing 2 Part Art Resin Jewelry Making, Wood, Resin Molds, Countertop, DIY Crafts

Super easy to use, if your buying for 1st time do research on how you mix and pour correctly. I can confirm this product dried with absolutely no bubbles, and had the exact working time, de-mould time and drying time as stated. Quality is very high, it mixes very easy (as stated do research on how to mix correctly) the 50/50 ratio has to be exact and full slowly mixed to ensure correct drying time and no bubbles.

This is was a trial trying to find the right epoxy I was comfortable with, and I've never turn back this is by far the best stuff I've used and will continue to use, easy to mix, less bubbles and shorter curling time, highly recommend for value and quality.

As resins go, it's as good as all the others, and the results are great as long as you don't introduce moisture, and keep it close as possible to a 50/50 ratio. My only gripe is that the neck of the bottles are too wide to pour cleanly of the rewrite small amounts, and due to the viscosity of the liquid, you will end up spilling most of it down the sides. If you require a small amount, you will have to pour out more than you need it to the vessel, then put the the excess back into the bottle. Don't forget which is which!

Having used a number of different epoxy resin’s, i’ve found this kit to be my favoured choice. The resin is of good clear quality and mixes very well delivering good results with a tough hardwearing result, no bubbles, and exceptional clarity. Hardening time in shallow molds is usually around 12 hours, but thicker or deeper molds can take up to 24 hours before being released from the mold. I particularly like the way this product mixes because once you combine the two elements of A & B together they give off a cloudy appearance until the mix is complete which is achieved by stirring slowly for approx 3-4 minutes whereby the liquid becomes clear again. There is a degree of fumes given off and therefore i would suggest the use of a face mask and goggles to avoid any health issue’s. Good mixing gives best results and avoids a lot of problems with the liquid not gelling properly. You can also warm the two element tubs A and B in a bowl of warm water prior to mixing which accelerates the time to achieve a good gel. Well recommended.

Love this stuff, dead easy to use. Great bubble free finish. Cures in 8 hrs which is fine for me. Good suff.

I did find the size of bottles too big for handling, it became a little messy. This was the 1st resin I've used which really needed warming before mixing else it stayed very cloudy even after continually stirring for over 10 mins. Once I warmed the products it was a very clear, bubble free resin which set quickly and firm.

Works better on bowls than pens, but when it is used for bowls the results are excellent.

I like the cost of the product, I have used this twice now and have found it really good. The only issue with the product is when you pour it out you've got to be so careful not to pour too much. The Product would be great if it had pumps with it.