Matho Models35015 Metal Fence Set A - photo-etch - 1:35 scale - unpainted and unassembled scale model accessory

الوصف

★★★★ THIS IS A SCALE MODEL ACCESSORY - REQUIRES ASSEMBLING AND PAINTING ★★★★Contains 1 photo-etch fret with 2 highly detailed fence parts. Each part is 3,5 cm wide (1,38") and 4,3 cm high (1,69"). Left and right edges - also detailed with bolts - can be bent 90° for easy attachment to a support column. Use a large photo-etch bending tool for best results.Compatible with 35016 Metal Fence Set A - Gate (sold seperately).Also available as part of our BIG SET, containing 4 fence parts and 1 two-part gate: 35086 Metal Fence A - big set with gateContains only photo-etch parts. Base and wall section not included. How to use and paintLeave the fence in the fret while painting and weathering. First airbrush a few layers of (acrylic) primer. Let it dry for at least 24 hours between each coat. After that you can continue with your regular (acrylic or enamel) colors and weathering products. Seal with a few coats of varnish. Let the varnish dry for at least 24 hours so it is hard enough to protect your paint-work during the next steps.Always be very gentle in the following steps when handling the fence to prevent the paint from scratching.Place the fret on a hard (for example wood or glass) surface, and cut out the fence from the fret with a fresh knife. Use a micro file to clean up any residue of the fret. If cut well however, you will not need to use a file on straight edges.Some parts will now need some extra painting to restore the damaging caused when cutting from the fret or when handling afterwards. Use a round brush with very fine tip with your main color to touch up the parts where you can still see the PE brass color shining through.