Question 1

Can you conect this tank to more than one motor at the same time. Like my main motor and my kicker/ trolling motor?

Accepted Answer

YOUR ONLY TWO concerns should be that the main fuel line must not be permitted to receive air and the tank vent must be very high relative to the tank. There are an infinite sneaky ways this can happen.  Check valves are never totally reliable  You can do your connection to both engines but you must shut one line off with a high quality valve such as the Moeller fuel valves.ONE ENGINE can steal fuel from the other if external fuel pumps are not involved. It is possible to run both engines from one source as long as there is an electric pump involved that will keep positive pressure on both within the constraints of the permissible line pressure.  Kicker pressure is usually very low. Most outboards pressure is very low. Pumps output bottoms out at maybe 3 pounds which is usually too much. Pressure regulators are pitifully poor unless fuel is being used. The Moeller 3 way selector valve used backwards and selecting engines instead of tanks (backwards from intent) where it blocks off the engine not in use would work.  AT NO TIME is a situation where air bleeding back from an engine pump or whatever is permitted into the fuel line. If that should be permitted no fuel will flow; only air. Most fuel pumps have check valves but a failed check valve might be the reason you are selecting the kicker.  Search Moeller fuel tank selector valve and see what is there.  You want a valve that allows you to choose one but not both engines. Remember that the usual bad news comes from air being allowed into the fuel line. THAT BEING SAID; a valve that does allow air into the fuel line is a sneaky way to make sure nobody drives you boat more than a few feet if they do not realize what it is doing.  I would choose that more quickly than a shut off valve that is obvious as to what it does. The vent to air of that valve should be higher than the engines. just like the tank vent is supposed to be quite high relative to all possible attitudes of the deck. Remember that if the boat is trailered up a ramp "water line" no longer exists just as it no longer exists if your boat is walking on the propeller or making a steep turn.   The vent must be high relative to that.

Question 2

All the internal fuel lines are installed in this tank correct? Meaning all you have to do is drop it in and hook up and go?

Accepted Answer

It comes complete with a float guage . You have to attach your fill hose, vent hose and supply line. I ordered the install kit and mounting clamps. Very nice sturdy tank.

Question 3

Does this tank have a place to hook grounding wire?

Accepted Answer

Yes

Question 4

Is the fuel fill connection facing the starboard side?  My boat has the fuel fill on the port side.

Accepted Answer

Fuel fill faces to starboard side if installed in boat correctly with outlet connection to the rear. Vent connection will rotate to any position.

Item Package Dimensions L x W x H	69.5 x 16 x 8 inches
Package Weight	14197.68 Grams
Item Dimensions LxWxH	16 x 69.5 x 8 inches
Item Weight	18 Pounds
Brand Name	Moeller Marine
Warranty Description	Manufacturer
Model Name	032535
Color	Cream
Material	Plastic
Suggested Users	Unisex-adult
Number of Items	1
Manufacturer	Moeller Marine Products
Part Number	032535
Style	35 Gallon - 69.50 In. L X 16.00 In. W X 11.00 In. H
Included Components	Fuel Tank
Size	35-Gallon, 69.5" x 16" x 8"
Sport Type	Boating
Fishing Technique	Boating

معلومات عنا

خدمات العملاء

دعم العملاء

الوصول الإقليمي

القانونية والسياسات

اجتماعي

احصل على التطبيق

Moeller Marine 35 Gallon Below Deck Fuel Tank

الوصف

المواصفات

لديك سؤال؟ انظر ماذا طلب الآخرون

الأسئلة الشائعة