MATCC

I’ve been using ‘proper’ snow foam lances for a long time and I can say that from experience that this style gives the best results, but I find that there are a lot of very similar products being sold under different brand labels. This one was a little different from most that I found recently in that it has a solid brass attachment to fit the lance of a Karcher pressure washer. It looked like it fitted the bill so I bought one, only to find on delivery that the brass adaptor itself was poorly aligned. With the Karcher lances it is important that the adaptor stands ‘top-to-bottom’ as shown in the advertisement picture, but I found on the one supplied to me that it was at an angle. That meant that when attached the lance would also be at an angle, instead of standing upright where it has to be for effective operation. The adaptor couldn’t be tightened any further so I had no choice but to return it to Amazon, who promptly refunded me. Apart from this fault the product looked OK, with a good size of bottle and good materials used in manufacture. However, I chose not to order another as the fault has been reported by other reviewers too.

I've used this lance about 4 times now and would recommend it for spraying the car.It is robust , made of solid brass fittings and a strong plastic bottleGetting the mix of water to foamer takes a bit of experimentation but a nice thick foam can be obtained.The only thing I would note is that even setting the head to deliver minimum spray, the liquid is drawnfrom the container at a quite rapid rate so you have to be quick applying the foam over the car.I find one full bottle will , if you work quickly ,apply 2 coats of foam over a medium car with no problemsI have an older quite powerful Karcher so maybe flow rate is high on my machineIf your car is not too dirty I reckon a couple of coats of foam followed by a soak and pressure washer rinse off will clean your car to an acceptable level without further cleaningI would recommend this foamer

Arrived today so decided to try it out and I made sure all connections were tight before using as it was obvious they had just been hand tightened! Filled bottle with the snowfoam and it worked great. Totally covered the car with thick foam. But!!!!!!! When trying to remove the cannon from the lance it was stuck!!! I have been at it for nearly an hour and finally manage to remove by opening the lance! Really not sure if I will use this again or need to make modifications.

Used in conjunction with a K4 pressure washer and Auto Finness Avalanche. The Snow Foam cannon produced lovely thick suds the dwelled well on the paint. I had previously used the Karcher brand Foam Cannon and the MATCC is a far superior product.One full bottle was enough to generously cover my A5 with spare to clean the windows on the front of the house!I’ve marked it down 1 star because when the fitting is tightened it leaves the bottle at 90 degrees to the trigger, nothing a bit of PTFE tape won’t fix but annoying non the less.

Cannot fault this. Heavy duty metal fixings. Fits my new Karcher K2 pressure washer. Added an inch of Auto Finesse Snow Foam (as per instructions) then filled remainder of bottle with warm water. Produces a lovely thick foam that covered car in seconds. Adjustable dial works well, but at the recommended dosage you just leave it on max anyway. Feels built to last, with a heavy duty plastic bottle. Only foam cannon I've ever tried but i don't know how you'd improve on this.

Have an old Karcher K2 pressure washer and I have been using Chemical Guys Honey Dew snow foam with the Karcher 'foam cannon'. This gun creates a lot denser foam than the Karcher even with hard water (I live in one of the worst places in the country). Don't waste money on the Karcher canon, regardless of any good reviews it's not suitable for snow foam. Spend a few more notes and pick up this canon instead.

My lance snow foam bottle work well and it doesn't use as Mutch soap as thought it would fits my k2 pressure washer good buy

First chance to use this item today and it performed very well. After a little adjustment with the mix knob and spray pattern and the car was covered in foam. I used Demon snow foam and whilst the suds weren't as thick as I'd hoped the lance certainly did the job. I'm expecting it will perform better with better quality snow foam. Overall I would recommend this item.