Liquid Rubber Polyurethane Deck Coating – 10X Stronger Than Traditional Deck Paint & Deck Stain – Flexible, Waterproof Sealant for Wood, Concrete & Plywood – Textured Finish – Neutral Beige – 4 Gallon

Our deck is only four years old. It's crap. The builder used substandard materials, and the expensive and time-consuming stain we put on it three years ago lasted less than a year. We have debated pulling off all the crappy-quality redwood and cedar and replacing it with composite materials. But we don't have the money for that this year, so I did some research to see if I could find paint that would turn it into something resembling a composite deck. Well, this paint did the trick! I can't speak to its durability because I'm still in the middle of my paint job. But I can talk about how easy it is to apply and what a great waterproof barrier it creates. This paint is thick. It's so thick that it doesn't drip off your brush or roller. And you would think that thick paint would be a PITA to apply. But it isn't. It goes on SO smoothly. I used a brush for most of the railings (I hate painting railings!!) and a brush for the primer coat on the deck, followed by a roller. I used a roller with a thicker nap, which gave the decking some texture. I really like the way it looks and feels. It isn't slippery in the least, and it doesn't burn my bare feet when I walk on the deck in full sun. I did three coats of Liquid Rubber on the rails themselves and six coats on the top of the railing, as well as six coats on the decking. I want to make sure this paint lasts as long as possible because I'm 65 with a bad back and bad hips, and I do NOT want to do this again! Another great thing about this paint is that it cleans up so easily. Given how thick it is, that really surprised me. When I first started looking at this product, the color I needed (which matches my siding perfectly) wasn't available in the five-gallon buckets. So I waited, and a few weeks later, it was and I snapped up two buckets. The color is perfect. I would be willing to bet that by the time I'm done, someone could look at this deck and never know that there's cheap, crappy wood under that beautiful paint. One last thing. I ordered two five-gallon buckets and only received one (the second one got damaged during shipping). I contacted Liquid Rubber, and they rush-shipped another bucket to me the same day. What a great company and great product.

Great quality product

Buyer beware! Not as advertised. This is a horrible product and is definitely not as advertised. The first problem is that it arrived leaking from the lid of the container, causing a huge mess inside the box. However, the main problem is that it pours out thick, but is very thin and almost translucent once applied. Followed all directions for preparation and application, but there is very little coverage and no rubberization whatsoever. Applied 5 coats and it still looks like a light stain. Wasted an entire weekend trying to make this work and now we’ll have to go purchase a different product and start over. Huge waste of time and money! This product deserves a negative rating but I was forced to give it gave it one star because it would not allow me to post review without a rating. 👎🏼👎🏼👎🏼

This item works as advertised. I used it on the floor of my shed and it looks good. It applied with ease getting 3 coats in the 10x10 area. It sealed well and gave the shed a little color. Drying between coats was quick and set well overnight. I thought it would be a little bit thicker but overall I'm pleased with the product and the results. I'll use it again.

Our deck is over 15 years old and had multiple cracks and holes We were considering replacing the deck but I decided to try this first. It’s been two years in direct sunlight and and the rubber is still holding strong. Our patio furniture is very heavy and dragging it around for two years has not caused a single chip. The slip proof rubber is great for the pool deck but in direct sunlight it gets extremely hot. It started pealing on the new boards we had to replace so make sure your lumber is aged. I applied this directly over old stain and bare areas with no prep or pre products other than the hose to give it a quick rinse. I need to purchase more to touch up the pealing but this is such a great investment on our home I will be going with the cooling one on the entire deck this time. This filled in every crack and seam so the boards look like one continuous board. It’s dries like hard plastic. Pic here shows with first coat and 2nd with imperfections gone.

Did a deck , prime it first

After the first snow it was peeling off the wood. Very disappointed for the price we paid

Works great

Our 15 year old Duradek was showing it's age. It had lost its sheen and was fading and looked dirty. We really didn't want to shell out $7,000 to hire a company to replace a 350 sq/ft deck so we came upon the Liquid Rubber option. Approx. $1000 and 16 hours total of DIY work, and we had a brand new deck. This was 2 years ago and it's holding up very well on a south facing Alberta deck that can hit 35+C in summer and -40C in winter. Considerations: 1. DO YOUR PREP WORK!! Looking at the pictures of dissatisfied customer's projects, it's clear that not enough prep work was done prior to application. For Vinyl decks, the existing vinyl should still be well adhered, with no lifting or bubbling. Other than that, faded vinyl or small scratches or cuts are not an issue if you follow their instructions. For going over vinyl, it's imperative that after giving it a good wash and rinse with soap and water (and letting it dry), you give a good rub of acetone on the entire surface of the deck (use a respirator when doing this). This will soften the vinyl and make the primer adhere wonderfully. We used approx. 4 to 5 L of acetone to do our whole deck. Do not skip the acetone or primer steps for going over vinyl! 2. Apply somewhat generously with a roller, and alternate 90 degree cross directionality between each coat. Make sure your last coat is the direction water will flow off the deck or to the drain. Another tip: try and finish each application with the roller going in the same direction (eg. finish all strokes either on the push or the pull). This helps reduce that "vacuuming carpet" or "mowing lawn" effect from finishing in the opposite direction on each pass. 3. We applied three coats of textured followed by three coats of smooth. This works well to create a non slip environment but still comfortable on bare feet. The resulting semi-textured flooring does tend to hold more dirt and pollen and probably requires more frequent cleaning than going with only a smooth finish, but we elected to err on the side of safety. That said, it still cleans easily with soap and water and elbow grease. I wanted to wait a couple years to write a review. We're so happy with our front deck that we're now doing our rear deck. I plan to do our concrete garage floor with the leftover product!

great product , but poor service from amazon,,,, i have been awaiting a refund more than 3 weeks ......not good enough.........

Wasn't the Best product to buy

Like this a lot. Goes on easily, works as stated.

The colour was a lot lighter than what is shown. I ordered textured Misty Grey which looks like a medium grey colour but it was a very light grey. It still worked for my deck but would have preferred the slightly darker grey. Applied easily with a paint roller but the whole roller is garbage afterwards. This 4L bucket was more than enough for 4-5 good coats with plenty left over on my 14 foot x14 foot deck.