MANTO 2 Pack Screen Protector for iPhone SE 3 (2022), SE 2 (2020), 8, 7, 6s, 6, Full Coverage Tempered Glass Film Edge to Edge Protection 4.7 Inch, White

I was apprehensive about any new screen protector due to the many issues I’ve faced with them. This screen protector is bang on perfect, finally a glass protector that is actual glass. Installing it was easy, it fits flush and the guide actually works and isn’t just a plastic boarder.Installing - It took 2 attempts to fit it, attempt 1 was bad because as I was laying it down some dust shot under. Attempt 2, I carefully pulled it back off and used the sticker for dust removal (tip- gently use the sticker to grad dust on the protector itself if the above happens)Material - It feels like quality material, it feels like glass, very smooth and has a weighted touch to it. I’d say that’s a personal thing, I personally like it to feel glossy and “weighted”. Even the white boarder is glass and not that weird plastic others use. Don’t let that put you off, the touch screen still works perfect, no lag, no delay, no missed touches.Bubbling - Bubbling is (mostly) down to user error, but can also be down to shoddy products. Companies should focus on the edges as no-one wants a screen protector that will have bubbles around the edge and hear the excuse “because the iPhone SE has a curved edge” that’s not good enough. For me I personally don’t like seeing a gap between scree protectors and cases. As I said above, I had 2 attempts because of 1 bubble. I removed the dust placed the protector back into the guide, et voila. Done, no bubbles, no marks, no nothing.Edge protection - no most protectors have that gap around the border which is fine, but as mentioned there’s a fine line before it will bubble. This screen protector has edging, so even if it bubbled around the edge you wouldn’t see it. It fits into my case easy and without issue. I have a MOUS case, I concerned that the screen protector would have an issue with it. Nope it fits very snug, if it didn’t have the white border you wouldn’t know it’s there.After working in a phone shop for years I’ve had the chance to fit many screen protectors, in fact I became awesome at it. Fast forward to this year and I’ve gone through 18 protectors. At first I though I lost my touch but after inspecting the protector I noticed something they all had in common, the way they’re built.The iPhone SE has a curved edge most of the protectors I had were just a fraction too wide it left an edge bubble all the way round. The only thing I could do was put washing up liquid around the edge to stop the happening. Another thing they had in common was the claim on “no bubbles” air bubbles usually come down to incorrect installation, again I noticed this wasn’t the case. Because they didn’t sit flush around the edge it allowed air to trap itself. No matter how much you pushed the air it would keep bubbling. Lastly, they were “glass” which is in-fact false, most were too bendy to be that. And if it had the borders around the edge they were plastic, the screen protectors felt like acrylic as opposed to glass.Now for the pros & consPros- quality feel- change the boarder from black to white- easy to install- looks premium- no bubbling (take your time and remove the dust over an over again)- price (well priced for what it is)- extended warrantyCons- instructions in broken English- link to the install video only shows the iPhones that are full screen and both like the iPhone SE 2020.- would like to see a range of colour if possible for the borderIt gets a 5 purely because it deserves it, I’m hugely critical with screen protectors. Perhaps any other reviews I’ve done were through rose tinted glasses as they weren’t very good overall.(I would post a picture but I can’t take a photo of my own phone as I don’t have another one to do that with)

Very happy so far with this product. It’s been a few months and my screen is (fingers crossed) doing well. Fits perfectly with the phone case not problem with that. Very user friendly and the guide gadget yoke was useful. Came with a free pen/stylus/phone stand which I wasn’t expecting and was a pleasant surprise. Good instructions and the inclusion of the wipes was good. The air bubbles originally when I installed it took a little while to fully get out and I thought I had done it wrong but it only required a bit of elbow grease. I do notice sometimes that my screen is less sensitive that it was without (sometimes if I only tap something with the corner of my finger it doesn’t respond unless I lay my finger flat against the screen) but it’s probably impossible to find one which matches the sensitivity of the screen alone and most times I forget there’s even a cover there. Only thing I will say is the see through part of the screen is slightly too small for my phone even though it was the right one for the model. It’s not a case that I have put it one wonky because it is slightly covering the screen on both sides but not more than a millimetre or 2. Presentation was really nice and personal not usually something I care about but I had to comment on it here because it had the personal touch of something which had been put together by hand while being of a professional standard.

I chose this screen protector firstly as it is glass, and secondly as it has white edges - very few have this, most are transparent all over. I have a new phone with a purely black screen and was missing the white edges of my old phone! So this seemed like the answer! It certainly covers the black edges, but I have to say that the white appears a little grey when covering over the black so it is not pure white as an original phone would be - but good enough for me. The installation instructions were very simple to follow and I had no difficulty adhering it on the first attempt, with no air bubbles or other defects. I think having the glass protector might make typing a little less responsive, but barely so. I am very pleased I have used this product and feel confident that my screen is protected from the worst of daily scrapes and scratches.

Very good product! Easy to install especially with the installation device! It made it a lot easier to align properly! Great value for money. You get a few bubbles at first but they’re quite easy to get rid of. Just press with your nail edging them to the edges of the screen and they disappear leaving you with a great finish! A lot more protection on the sides and corners too!

I have had a few different glass screen protectors and this is one of the best. I usually go for curved ones to avoid a seam around the edge but thought I would give a flat one a try. It arrived quickly and well packaged (inc a free stylus/stand gift — Thanks), included were the usual wet and dry wipes a cloth and a dust removal sticker. Application was straight forward and once aligned with the ‘Home’ button just dropped into place, no air bubbles and perfectly lined up. The edges have a slight bevel so it looks like its part of the phone screen and meets perfectly with a case providing all round protection.The glass is clear and does not impact on touch responsiveness, although it is still new and I cannot comment on longevity I would happily buy again.Being picky the only area for improvement would be an installation guide, although I did not need one this could have been luck.