TAKIMO1 Gallon 3×UV Resistant Resin Kit,No Bubble & Crystal Clear Epoxy Resin for Coating, Casting, Table Top,DIY, Bar Top, River Tables, Resin Art, Wood with High Gloss Finish

This worked great for refinishing our counter tops and have held up amazingly. definitely recommend if you’re looking to stay on a budget and not buy new counters!

Sample is very soft and sticky after 24 hours. Will it ever cure? Yes! It finally did cure very hard. It took a good 30 hours to harden.I have used alot of epoxy. This hardened slow but ended up very hard. This product is also less full of bubbles compared to other epoxies I have used. The blow torch quickly removed the few small bubbles.I rate this as the best epoxy I have used for fewest bubbles and hardest finish.

Works well and as described but do a test with a small amount if using this for the first time. Measure carefully, mix well, and do not wait too long before pouring out.

The media could not be loaded. First of all, the product is what it says it is. The instructions are a bit quirky, but if you follow them time-wise and mixture recommendations, it works great. The chemical reaction time seems accurate. The bubbles are easy to remove with a heat gun, and the clarity is excellent. This piece will reside outside by my fire pit, so we’ll see how it holds up to UV and weather. This is my third attempt at this project. The two prior attempts were with a much more expensive product that failed miserably. This seems very forgiving and sets up perfectly.

Great product! I used it for countertops over peel and stick.

We are using this product to seal off a 1in gap between the driveway and garage floor. There is a 1in foam compact rod that seals the bottom of the gap. Still wait on the product to set up so that I can cap it off with a concrete patch material.Update: The epoxy never got hard and stayed tacky. Should have gone with JB. Oh well, I ended up capping it off with a thick layer of Sika Pro non-sag concrete fix. Maybe in 10k years someone will think this is a modern day tar pit and extract DNA of the bugs and leaves grin.

Use esta resina con fines de prueva y error en prollectos , ( en nada que pretendiera conservar ) y me sorprendió la resistencia que tiene pero eso sí , no valen los más o menos con las cantidades , tienes que prepararlo exacto las madidas de compuesto A y B sino no seca tanto al pasarte por uno o el otro y nunca mesclar 2 veses en el mismo recipiente porque tampoco secara por más precisa que sean las medidas pero no hay resina que no le pase esto , TODAS LAS RESINAS SON SENSIBLES A MALAS PREPARACIONES , NO HAY MARCAS QUE FUNCIONEN BIEN SI MESCLAS MAL

Not good for pours thicker than an inch and 1/2 unless you have a vacuum chamber to degas the resin as it's very prone to bubbles. The cure time is more like 72 hours before it can be turned on a lathe or sanded. Good price though, if you are making jewelry or small coasters, and have a vacuum chamber.The resin is crystal clear as long as care and time is invested in the degassing process. Must be SLOWLY hand stirred, to avoid bubbles as well.